System description - Pilz GmbH & Co.

Modules
Digital input/output (standard)
PSSu K S 8DI 8DO 0.5(-T)
Notice
][Wichtig_PDB
This data sheet is only intended for use
during configuration. Please refer to
the operating manual for installation
and operation.
][Technische Daten PSSu Digitale E/A/K
Technical details
3.4
Application range
Standard
Module's device code
0630h
Number of ST input bits 8
Number of ST output bits 8
Support in system environment A
from ST firmware version for other head modules 17
from ST firmware version PSSu H S PN 2
from ST firmware version PSSu WR S IDN 9
Support in system environment B
from head module ST firmware version 1.2.0
Electrical data
Internal supply voltage (module supply)
Supply voltage range of module supply
4.8 - 5.4 V
Module's current consumption
45 mA
Module's power consumption
0.13 W
Periphery's supply voltage (periphery supply)
Voltage range
16.8 - 30.0 V
Module's current consumption with no load
0 mA
Module's power consumption with no load
0.00 W
Inputs
Number 8
Input voltage
24 V DC
Input current
2.5 - 4.0 mA
Min. threshold voltage when signal changes from “1” to “0” 11.0 V
Max. threshold voltage when signal changes from “0” to “1” 12.0 V
Potential isolation between input and voltage for the internal module
yes
bus
Outputs
Number of positive-switching single-pole semiconductor outputs 8
Short circuit-proof
yes
Potential isolation between semiconductor output and input yes
Potential isolation between output and voltage for the internal yes
module bus
Typ. output current at “1” signal and rated voltage of semiconductor
0.50 A
output
Permitted current range
0.00 - 0.62 A
Max. pulsed current for t < 100 ms
6 A
Residual current at “0” signal
0.02 mA
Permitted loads
inductive, capacitive, resistive
Infeed for
Outputs
Voltage
24 V, DC
Voltage tolerance -30 %/+25 %
Max. continuous current that the external power supply must provide
10.0 A
Max. unit fuse protection F1
10 A
Max. unit fuse protection F1 in according with UL508
4 A
3.4-60
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01