System description - Pilz GmbH & Co.

Modules
Voltage distribution
PSSu E PS-P +/- 10V
Module features
Integrated protection mechanisms
3.11 PSSu-2011-01
Modules Voltage Gertebild
E distribution
PS-P +/- - 10V
][Bildunterschrift Netzteil
Electronic module with DC power supply
for external voltages
Approvals
][Merkmale_Versorgung Netzteil
Primary side of power supply
– The external supply is fed to the
base module terminals.
– Voltage: 24 V
][Merkmale_Versorgung 10/15 V
Secondary side of power supply
– The module supplies the output
voltage to the base module terminals.
– No buffer when the supply voltage
is interrupted
– Voltage: 10 V/-10 V
– Max. continuous output: 10.0 W
– Max. current at 10 V: 1.0 A
– Max. current at -10 V: 0.5 A
][Merkmale_LED Netzteil
LED for:
– External voltage
Module description
][Schutzmechanismen Netzteil
The module has the following protection
mechanisms:
Short circuit-proof
Temperature monitoring
– Shutdown in the case of overload
– Restart when the module has
cooled down.
The external supply and the module
bus supplies are galvanically isolated.
PSSu E PS-P + - 10V
][Gertebeschreibung Netzteil
The module may be used to convert a
24 V protective extra low voltage, in
order to supply sensors and actuators
connected to the PSSuniversal system.
Zulassungen
Block diagram
Blockschaltbild
12 22 13 23
3.11
Module Bus
=
=
11 21 14 24
3.11-22
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01