System description - Pilz GmbH & Co.

Modules
Counter modules (standard)
PSSu E S ABS SSI(-T)
Connecting an SSI encoder
(master mode)
Without C-rail
Encoder supply via the PSSu
EPD module
0 V connection is not absolutely
essential.
D+ 11
0 V 12
21
22
Cl+
0 V
D+
Cl+
0 V / GND
Cl-
D-
13
23
D-
14
24
Cl-
Notice
][Wichtig_PDB
This data sheet is only intended for use
during configuration. Please refer to
the operating manual for installation
and operation.
][Technische Daten PSSu ST-Zähler
Technical details
3.9
Application range
Standard
Module's device code
0320h
Number of ST input bits 32
Number of ST status bits 8
Support in system environment A
yes
from ST firmware version for other head modules 11
from ST firmware version PSSu H S PN 2
from ST firmware version PSSu WR S IDN 4
Support in system environment B
yes
from head module ST firmware version 1.0.0
Electrical data
Internal supply voltage (module supply)
Supply voltage range of module supply
4.8 - 5.4 V
Module's current consumption
101 mA
Module's power consumption
0.51 W
Periphery's supply voltage (periphery supply)
Voltage range
16.8 - 30.0 V
Module's current consumption with no load
10 mA
Module's power consumption with no load
0.24 W
Max. power dissipation of the module
0.75 W
Counter interface
Number of counter inputs 1
Type of counter inputs
SSI encoder
Max. number of bits on the counter input
32 Bit
Selectable transmission rates
62.5 kHz, 100.0 kHz, 125.0 kHz, 250.0 kHz, 500.0 kHz,
1,000.0 kHz, 1,500.0 kHz
Coding of the input signal
Binary, Grey
3.9-6
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01