System description - Pilz GmbH & Co.

System environment A basics
System description
System software
1.1
][Systemsoftware environment description
software
A basics neu
software is available to provide
support when designing and assembling
a PSSu system, configuring
modules and during the wiring test. It
consists of the following parts:
PSSuniversal Assistant
The PSSuniversal Assistant is a software
package that provides support
for designing and assembling PSSu
systems. The software is available licence-free
and can be used independently
from the system software
PSS WIN-PRO.
The PSSuniversal Assistant has the
following function range, for example:
Create project with PSSu systems
and assemble PSSu systems
Configure module parameters
Generate project parts list
Update modules' firmware
Print/documentation
PSSuniversal Configurator
The PSSuniversal Configurator is a
software package used to configure a
PSSu system for SafetyBUS p or
PROFINET/PROFINET with
PROFIsafe profile. The software can
only be used in conjunction with the
SafetyBUS p Configurator of the
PSS WIN-PRO system software or the
Siemens software SIMATIC STEP 7 -
HW Config.
The PSSuniversal Configurator has the
following function range, for example:
Assemble PSSu system
Configure PSSu system for
SafetyBUS p
Configure PSSu system for local
enable principle
Configure module parameters
Configure PSSu system for
PROFINET or PROFINET with
PROFIsafe profile
A licence for PSSuniversal Startup
is required to download the FS configuration
to a PSSu system via the
Siemens software SIMATIC STEP 7
– HW Config.
Print/documentation
PSSuniversal Startup
PSSuniversal Startup is a software
package used to test the wiring of a
PSSu system connected online.
A separate licence is required for the
software. The software has the following
function range, for example:
Upload the system data of a PSSu
system
Test the wiring of the inputs on a
PSSu system
Test the wiring of the outputs on a
PSSu system (forcing)
Display system properties and system
information
Read error stack
Print/documentation
PSSu systems can be assembled using
both the PSSuniversal Assistant
and PSSuniversal Configurator. However,
it is easier and clearer to assemble
a system while designing a
configuration with the PSSuniversal
Assistant. Already assembled PSSu
systems can be imported in both system
software sections.
Once installed, all the above system
software sections are available.
PSSuniversal Assistant and PSSuniversal
Startup can be launched via the
"Programs" directory" or a desktop
icon, while PSSuniversal Configurator
can only be launched via the
SafetyBUS p Configurator of the
PSS WIN-PRO system software or the
Siemens software SIMATIC STEP 7 -
HW Config.
1.1
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
2011-04
1.1-33