System description - Pilz GmbH & Co.

Modules
Voltage distribution
PSSu E PD(-T)
Base module
Screw terminals:
PSSu BP-C1 1/12S
PSSu BP-C1 1/12S-T
Cage clamp terminals:
PSSu BP-C1 1/12C
PSSu BP-C1 1/12C-T
Terminal configuration
With C-rail:
11-21: 0 V periphery supply
(11-21 linked internally)
12-22: 0 V periphery supply
(12-22 linked within the base module)
11
12
21
22
13-23: C-rail supply
(13-23 linked within the base module)
14-24: +24 V periphery supply
(14-24 linked internally)
13
23
15-25: 0 V periphery supply
(15-25 linked within the base module)
14
24
16-26: C-rail supply
(16-26 linked within the base module)
15
25
16
26
Notice
][Wichtig_PDB
This data sheet is only intended for use
during configuration. Please refer to
the operating manual for installation
and operation.
][Technische Daten PSSu Spannungsverteilung
Technical details
3.11
Application range
Standard
Support in system environment A
from FS firmware version for other head modules 1
from ST firmware version for other head modules 1
from FS firmware version PSSu H F PN 1
from ST firmware version PSSu H S PN 1
from ST firmware version PSSu WR S IDN 1
Support in system environment B
from head module FS firmware version 1.0.0
from head module ST firmware version 1.0.0
Electrical data
Periphery's supply voltage (periphery supply)
Voltage range
16.8 - 30.0 V
Module's current consumption with no load
10 mA
Module's power consumption with no load
0.24 W
Environmental data
Ambient temperature in accordance with EN 60068-2-14 0 - 60 °C
-40 - 70 °C coated version (-T)
Storage temperature in accordance with EN 60068-2-1/-2 -25 - 70 °C
-40 - 70 °C coated version (-T)
Climatic suitability EN 60068-2-14, EN 60068-2-1, EN 60068-2-2, EN 60068-2-30,
EN 60068-2-78
Climatic suitability in accordance with EN 60068-2-30,
93 % r. h. at 40 °C
EN 60068-2-78
Condensation
no
yes coated version (-T)
3.11-4
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
PSSu-2011-01