Chia Yu Lin and Steven L. Manley. Bromoform production from - ASLO

T4
PTG-9 WIND TURBINE GEARS
PTG-9-1 Wind Turbine Gears
Regency C 3:40pm–5:20pm
Session Chair: Alfred Pettinger, ESI, Foothill Ranch, CA, United
States
A Study of Gear Root Strains in a Multi-Stage Planetary Wind
Turbine Gear Train using a Three Dimensional Finite
Element/Contact Mechanics Model and Experiments
Technical Publication. DETC2011-47451
Phillip Prueter, Robert Parker, Ohio State University,
Columbus, OH, United States, Frank Cunliffe, Orbital2 Ltd.,
Leamington Spa, Warwickshire, United Kingdom
On the Use of 2 DOF Planetary Gears as Speed Increasers in
Small Hydros and Wind Turbines
Technical Publication. DETC2011-47042
Radu Saulescu, Codruta Jaliu, Oliver Climescu, Dorin
Valentin Diaconescu, Transilvania University of Brasov,
Brasov, Romania
Characteristics Analysis of Wind Turbine Gearbox
Considering Fatigue Loads Caused by Wind Fluctuation
Technical Publication. DETC2011-47316
Youngjun Park, Geunho Lee, Jinseop Song, Yongyun Nam,
Korea Institute of Machinery & Materials, Daejeon, Korea
(Republic)
Redesign of a Load Gearbox for 5MW Wind Turbines
Technical Publication. DETC2011-47492
Urs Viktor Giger, GDC Urs Giger GmbH, Mühlau, AG,
Switzerland, Kiril Borisov Arnaudov, Institute of Mechanics,
Academy of Sciences, Sofia, Bulgaria
RSAFP-3 FAILURE ANALYSES AND MODELING
RSAFP-3-1 Failure Analyses and Modeling
Sequoia 3:40pm–5:20pm
Session Chair: Erol Sancaktar, University of Akron, Akron, OH,
United States
Session Co-Chair: Toshiyuki Sawa, Hiroshima university,
Hiroshima, Japan
Failure Mode and Effects Analysis of Compressor Blade of
Aeroengine using Dempster-Shafer Evidence Theory
Technical Publication. DETC2011-47343
Jian-Ping Yang, Hong-Zhong Huang, Li-Ping He, Shun-
Peng Zhu, University of Electronic Science and Technology of
China, Chengdu, Sichuan, China, Dunwei (Grant) Wen,
Athabasca University, Athabasca, AB, Canada
A Fuzzy Similarity-Based Approach to Reliability Allocation
of Diesel Engine
Technical Publication. DETC2011-47378
Zhong-Zhe Chen, Yu Liu, Hong-Zhong Huang, Dan Ling, Li-
Ping He, University of Electronic Science and Technology of
China, Chengdu, Sichuan, China
132
An Improved Risk Based Design Method Based on a Novel
Upper Bound Formulation
Student Competition Paper. DETC2011-48413
Hami Golbayani, University of Connecticut, Coventry, CT,
United States, Kazem Kazerounian, University of
Connecticut, Storrs, CT, United States
A Method for Inferring Conditional Stochastic Failure Rates
from the Time-History of Observed Failures
Technical Publication. DETC2011-47485
David Thompson, Philippe Pebay, Sandia National
Laboratories, Livermore, CA, United States
Fuzzy Dynamic Fault Tree Analysis of Hydraulic System of
Cnc Machining Center
Technical Publication. DETC2011-47583
Yan-Feng Li, Jian Sun, Haiqing Li, Hong-Zhong Huang, Yu
Liu, University of Electronic Science and Technology of China,
Chengdu, Sichuan, China
MECH-8 COMPLIANT MECHANISMS
TECHNICAL SESSIONS
MECH-8-3 Synthesis Methods
Yellowstone 3:40pm–5:20pm
Session Chair: Mary Frecker, Pennsylvania State University,
University Park, PA, United States
Session Co-Chair: Charles Kim, Bucknell University, Lewisburg,
PA, United States
Design of Small-Scale Statically Balance Compliant Joints
Technical Publication. DETC2011-47482
Cesare H. Jenkins, Brian Jensen, Brigham Young University,
Provo, UT, United States
Synthesizing Parallel Flexure Concepts That Mimic
theComplex Kinematics of Serial Flexures using Displaced
Screw Systems
Technical Publication. DETC2011-47335
Jonathan Hopkins, Lawrence Livermore National Laboratory,
Livermore, CA, United States
Synthesis of Actuation Spaces of Multi-Axis Parallel Flexure
Mechanisms Based on Screw Theory
Technical Publication. DETC2011-48252
Chen Qiu, Jingjun Yu, Shouzhong Li, Beihang University,
Beijing, China, Hai-Jun Su, University of Maryland Baltimore
County, Baltimore, MD, United States, YanZhang Zeng,
Higher Education Press, Beijing, China
A Pseudo-Rigid-Body Model Approach for theDesign of
Compliant Mechanism Springs for Prescribed Force-
Deflections
Technical Publication. DETC2011-47590
Levi C. Leishman, Mark B. Colton, Brigham Young University,
Provo, UT, United States
An Energy Approach to the Design of Single Degree of
Freedom Gravity Balancers with Compliant Joints
Technical Publication. DETC2011-47783
Boaz Rijff, Just Herder, Delft University of Technology, Delft,
Netherlands, Giuseppe Radaelli, InteSpring B. V., Delft,
Netherlands