Chia Yu Lin and Steven L. Manley. Bromoform production from - ASLO

MSNDC-14 STRUCTURAL DYNAMICS
MSNDC-14-2 Applications
Columbia A 3:40pm–5:20pm
Session Chair: Brian Mann, Duke University, Durham, NC,
United States
Session Co-Chair: Michael Leamy, Georgia Institute of
Technology, Atlanta, GA, United States
Aeroelastic Limit Cycles as a Small Scale Energy Source
Student Competition Paper. DETC2011-47002
Jared Dunnmon, Samuel C. Stanton, Brian Mann, Earl
Dowell, Duke University, Durham, NC, United States
Reduced Order Modeling of a Bladed Rotor with Geometric
Mistuning via Estimated Deviations in Mass and Stiffness
Matrices
Technical Publication. DETC2011-47495
Yasharth Bhartiya, Alok Sinha, Pennsylvania State University,
University Park, PA, United States
Vibration Structure of Gyroscopic Planetary Gears
Technical Publication. DETC2011-48506
Christopher G. Cooley, Robert Parker, Ohio State University,
Columbus, OH, United States
Nonlinear Vibration of Gear Pairs with Tooth Surface
Modifications at Primary Resonance using a Perturbation
Method
Technical Publication. DETC2011-48689
Tugan Eritenel, Robert Parker, Ohio State University,
Columbus, OH, United States
High-Fidelity Modeling of Flexible Timing Belts using an
Explicit Finite Element Code
Technical Publication. DETC2011-48846
Tamer Wasfy, Indiana University - Purdue University
Indianapolis, Indianapolis, IN, United States
MSNDC-15 EXPERIMENTAL DYNAMICS,
UNCERTAINTY, AND VALIDATION
MSNDC-15-1 Experimental Dynamics, Uncertainty, and
Validation
Concord 3:40pm–5:20pm
Session Chair: Horst Ecker, Vienna University of Technology,
Vienna, Austria
Session Co-Chair: Hiroshi Yabuno, Keio University, Yokohama,
Japan
On theIdentification of Chaos from Frequency Content
Technical Publication. DETC2011-47473
Richard Wiebe, Lawrence Virgin, Duke University, Durham,
NC, United States
Stick-Slip and Whirl Motions of Drill Strings: Numerical and
Experimental Studies
Technical Publication. DETC2011-47949
Nicholas Vlajic, Chien-Min Liao, Bala Balachandran,
University of Maryland, College Park, MD, United States,
Hamad Karki, The Petroleum Institute, Abu Dhabi, United
Arab Emir
165
TECHNICAL SESSIONS
Damped Transition of a Strongly Nonlinear System of
Coupled Oscillators into a State of Continuous Resonance
Scattering
Technical Publication. DETC2011-47950
David Andersen, Xingyuan Wang, Yuli Starosvetsky,
Mercedes Mane, Sean Hubbard, Kevin Remick, Alexander
Vakakis, Lawrence Bergman, University of Illinois at Urbana-
Champaign, Urbana, United States
Effects of a Concentrated Mass on Chaotic Vibrations of a
Clamped Circular Plate with Initial Deformation
Technical Publication. DETC2011-48271
Kenji Okada, Kenichi Nagai, Shinichi Maruyama, Takao
Yamaguchi, Gunma University, Kiryu, Gunma, Japan
Bifurcations of a High-Frequency Horizontally excited double
pendulum
Technical Publication. DETC2011-48815
Hiroshi Yabuno, Kazuya Endo, Keio University, Yokohama,
Japan
DAC-14 MULTIDISCIPLINARY DESIGN OPTIMIZATION
(MDO)
DAC-14-2 Multidisciplinary Design Optimization (MDO)
Bryce 3:40pm–5:20pm
Session Chair: James Allison, MathWorks, Inc., Natick, MA,
United States
Session Co-Chair: Carolyn Seepersad, The University of Texas
at Austin, Austin, TX, United States
Multidisciplinary Design Optimization of Modular Industrial
Robots
Technical Publication. DETC2011-48196
Mehdi Tarkian, Johan Persson, Johan Ölvander, Linköping
University, Linköping, Sweden, Xiaolong Feng, ABB Corporate
Research, Västerås, Sweden
Sequential Sampling with Kernel-Based Bayesian Network
Classifiers for Set-Based Design
Technical Publication. DETC2011-48318
David Shahan, Carolyn Seepersad, The University of Texas at
Austin, Austin, TX, United States
Co-Design of an Active Suspension using Simultaneous
Dynamic Optimization
Technical Publication. DETC2011-48521
James Allison, Zhi Han, MathWorks, Inc., Natick, MA, United
States
Bounded Target Cascading in Hierarchical Design
Optimization
Technical Publication. DETC2011-48614
Xiaoling Zhang, School of Mechatronics Engineering,
University of Electronic Science and Technology of China,
Chengdu, Sichuan, China, Po Ting Lin, Mechanical and
Aerospace Engineering at Rutgers, The State University of New
Jersey, Piscataway, NJ, United States, Hae Chang Gea,
Rutgers University, Piscataway, NJ, United States, Hong-
Zhong Huang, University of Electronic Science and
Technology of China, Chengdu, Sichuan, China
W4