Chia Yu Lin and Steven L. Manley. Bromoform production from - ASLO

M1
MicroElectro Discharge Milling of Freeform Micro-features
with High Aspect Ratio
Technical Publication. DETC2011-48331
Francesco Modica, Valeria Marrocco, Gianluca Trotta,
CNR-ITIA, Bari, Italy, Irene Fassi, CNR-ITIA, Milano, Italy
DTM-1 DESIGN REPRESENTATIONS AND
FORMALISMS
DTM-1-1 Design Representations and Formalisms
Regency D 8:40am–10:20am
Session Chair: Kristina Shea, Institute of Product Development,
Virtual Product Development Group, Technische Universität
München, Garching, Bavaria, Germany
Session Co-Chair: Gregory Mocko, Clemson University,
Clemson, SC, United States
Environment Based Design (EBD) Methodology
Technical Publication. DETC2011-48263
Yong Zeng, Concordia University, Montreal, QC, Canada
Discovering Structure in Design Databases Through
Functional and Surface Based Mapping
Technical Publication. DETC2011-48322
Katherine Fu, Jonathan Cagan, Kenneth Kotovsky,
Carnegie Mellon University, Pittsburgh, PA, United States,
Kristin Wood, UT Austin, Austin, TX, United States
Towards a Formal Representation Model of Problem
Formulation in Design
Technical Publication. DETC2011-48396
Mahmoud Dinar, Jami J. Shah, Glen Hunt, Ellen Campana,
Pat Langley, Arizona State University, Tempe, AZ, United
States
An Information Technological Specification of Abstract
Prototyping for Artifact and Service Combinations
Technical Publication. DETC2011-47079
Imre Horvath, Zoltan Rusák, Eliab Z. Opiyo, Wilhelm F. van
der Vegte, Adrie Kooijman, David Peck, Delft University of
Technology, Delft, ZH, Netherlands, Eva Hernando Martin,
Faculty of Industrial Design Engineering, Delft University of
Technology, Delft, Netherlands
More Space to Think: Eight Years of Visual Support for
Rationale Capture, Creativity and Knowledge Management
in Aerospace Engineering
Technical Publication. DETC2011-47911
Nathan Eng, Marco Aurisicchio, Imperial College London,
London, United Kingdom, Rob Bracewell, Cambridge
University, Cambridge, Cambridgeshire, United Kingdom,
Gareth Armstrong, Rolls-Royce plc., Derby, United Kingdom
78
TECHNICAL SESSIONS
DFMLC-1 THEORETICAL FOUNDATIONS FOR DESIGN
AND MANUFACTURING INTEGRATION
DFMLC-1-1 Theoretical Foundations for Design and
Manufacturing Integration
Columbia C 8:40am–10:20am
Session Chair: Derrick Tate, Texas Tech University, Lubbock, TX,
United States
Study on Design Methodologies of Product Service Systems
Technical Publication. DETC2011-47140
Huibin Sun, Northwestern Polytechnical University, Xi’an,
China
Platform Approaches in Manufacturing - Considering
Integration with Product Platforms
Technical Publication. DETC2011-48275
Marcel T. Michaelis, Hans Johannesson, Chalmers
University of Technology, Gothenburg, Sweden
The Role of Conceptualization and Design in Product
Realization
Technical Publication. DETC2011-48676
Mohamed El-Sayed, Kettering University, Flint, MI, United
States
A Method for Evaluating Manufacturing Change using
Component Coupling
Technical Publication. DETC2011-48466
Christopher Brooks, Gregory Mocko, Clemson University,
Clemson, SC, United States
Parameters Influencing thePerception of Geometrical
Deviations in a Virtual Environment
Technical Publication. DETC2011-48096
Karin Forslund, Lars Lindkvist, Department of Product and
Production Development, Gothenburg, Sweden, Ola
Wagersten, Volvo Car Corporation, Gothenburg, Sweden,
Sebastian Tafuri, Daniel Segerdahl, Johan Carlsson,
Department of Geometry and Motion Planning, Fraunhofer
Chalmers Centre, Gothenburg, Sweden, Rikard Söderberg,
Chalmers University of Technology, Gothenburg, Sweden,
Sweden