SmartSensor HD - Interprovincial Traffic Services

More documents

Recommendations

Info

CHAPTER 4 • COMMUNICATION 49If you forget the sensor password, use the Click Here link and a new window will openproviding information about how to get a new password.Communication Error LogThe error log contains all errors stored in the sensor’s memory buffer. If you are havingtrouble connecting, using the error log may be helpful in the troubleshooting process. If youcontinue having trouble, save the error log file and contact Wavetronix Technical Services.NoteThe error log is cleared every time you close SSMHD< so if you need to save the file,do so before shutting the program down.Click the View Error Log link to view the communications error log (see Figure 4.13). Theerror log can also be accessed by clicking on the error log icon at the bottom of the Communicationscreen.Figure 4.13 – Communication Error LogUploading the Sensor’s Embedded SoftwareAfter clicking the Connect button, the software will check to see if your software versionmatches the version of the sensor’s embedded software. If a discrepancy is detected, theVersion Control screen may appear asking you to install firmware upgrades (see Figure4.14). If you think you have reached this screen in error, clicking the Recheck button willhave the software retry and ensure that there has not been a communication issue. Clickingthe Details button will display the current sensor and software information. Click theInstall Upgrade button to upgrade the software.
50 CHAPTER 4 • COMMUNICATIONFigure 4.14 – Version Control (left) and Software Upgrade Details (right)NoteClicking the Close button and continuing configuration may cause problems withfunctionality.The figure below shows how the firmware numbers are interpreted (see Figure 4.15). Themonth number is written in hexadecimal, meaning the months of October, November andDecember will be written as A, B and C respectively.Month(July)Year(2007)Day(5th)Figure 4.15 – Install Upgrade NumbersIf the row marked Digital is highlighted in red, the firmware upgrade may need to be installed.Compare the sensor number with the SSMHD number in the digital row of thedetails table. If the SSMHD firmware version date is more recent than the sensor firmwareversion date, the firmware upgrade will need to be installed; if the sensor’s firmware date ismore recent than the SSMHD firmware version date, a warning will appear notifying youthat the sensor firmware could be downgraded (see Figure 4.16).
Page 1 and 2: SmartSensor HDUSER GUIDE
Page 3 and 4: © 2011 Wavetronix LLC. All Rights
Page 5 and 6: Serial Connection 40 • Modem Conn
Page 7 and 8: 6 INTRODUCTION • SMARTSENSOR HD U
Page 10: Part IInstalling the SmartSensor HD
Page 13 and 14: 12 CHAPTER 1 • INSTALLING THE SMA
Page 20 and 21: Connecting Power and Surge 2In this
Page 22 and 23: CHAPTER 2 • CONNECTING POWER AND
Page 32: Part IIUsing SmartSensor Manager HD
Page 36 and 37: CHAPTER 3 • INSTALLING SMARTSENSO
Page 38: CHAPTER 3 • INSTALLING SMARTSENSO
Page 41 and 42: 40 CHAPTER 4 • COMMUNICATIONFigur
Page 43 and 44: 42 CHAPTER 4 • COMMUNICATIONFigur
Page 45 and 46: 44 CHAPTER 4 • COMMUNICATIONThe C
Page 47 and 48: 46 CHAPTER 4 • COMMUNICATIONViewi
Page 49: 48 CHAPTER 4 • COMMUNICATIONFigur
Page 54 and 55: Sensor Settings 5In this chapter˽
Page 56 and 57: CHAPTER 5 • SENSOR SETTINGS 55Not
Page 58: CHAPTER 5 • SENSOR SETTINGS 57Sma
Page 61 and 62: 60 CHAPTER 6 • LANE SETUPFigure 6
Page 63 and 64: 62 CHAPTER 6 • LANE SETUPTools Me
Page 65 and 66: 64 CHAPTER 6 • LANE SETUPFigure 6
Page 67 and 68: 66 CHAPTER 6 • LANE SETUPthe sens
Page 69 and 70: 68 CHAPTER 6 • LANE SETUP˽˽˽˽
Page 71 and 72: 70 CHAPTER 6 • LANE SETUPdetectio
Page 73 and 74: 72 CHAPTER 7 • DATA SETUP & COLLE
Page 89 and 90: 88 CHAPTER 8 • TOOLSFigure 8.2 -
Page 92 and 93: AppendixIn this chapter˽˽Appendix
Page 94 and 95: APPENDIX • SMARTSENSOR HD USER GU
Page 96 and 97: APPENDIX • SMARTSENSOR HD USER GU
Page 98: APPENDIX • SMARTSENSOR HD USER GU

SmartSensor HD - Interprovincial Traffic Services

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?