SmartSensor HD - Interprovincial Traffic Services

78 CHAPTER 7 • DATA SETUP & COLLECTION˽˽to store a copy of the data on a PC or laptop.ON/OFF Switch – Allows you to turn the sensor’s data storage feature on or off.2. Storage StatusThe Storage Status window shows the timeline, current storage remaining, and storagecapacity of the sensor (see Figure 7.7).Figure 7.7 – Storage Status˽˽˽˽˽˽Timeline – Shows the date and time that the first and last interval data packet wasstored.Current Level – Shows you how much storage is remaining by both a status bar and apercentage.Capacity (mm:dd:hh:mm:ss) – Shows you how long the sensor has been storing dataand how long the sensor will continue to store data before reaching maximum capacity.The capacity is tracked in months, days, hours, minutes and seconds and is based uponthe current sensor configuration. The total number of intervals stored is dependentupon the number of configured lanes, approaches and bin data types. If data is storedwith a different number of lanes, approaches or bin data types from the current sensorconfiguration, the Total field in the Capacity section will be incorrect. In this case, theCurrent Level section is a better indicator of storage capacity. Additionally, using avirtual connection will also cause the information in this screen to be incorrect.