Annual Report 2003-2004

NRIElectric Power Systems Research Center Extraction of shaft modeling procedure by finite element method and fatigueanalysis and critical points determination. Extraction of manufacturing procedure for generator parts. Feasibility study for providing the raw material in country and evaluation theinternal manufacturers capabilities about small synchronous generators.Project Documentation:A- The reports of project activities that have been written by the staffsA-1- Zero phase- Electric Machines Department; Report of “Reference collection”; Electric PowerSystems Research Center; NRI; 1999; Code: PEMPT02/1.- Electric Machines Department; Report of “Selection and training a suitable FEMsoftware and introductory studies”; Electric Power Systems Research Center; NRI;1999; Code: PEMPT02/2.- Electric Machines Department; Report of “Zero phase”; Electric Power SystemsResearch Center; NRI; 1999; Code: PEMPT02/3.A-2- First phase- Electric Machines Department; Report of “Analysis and evaluation of differentstructures of small synchronous generators and selection a suitable one”; Electric PowerSystems Research Center; NRI; 2000; Code: PEMPT02/4.- Metallurgy Department; Report of “Collection the tables of conventional alloys usedin synchronous generators”; Chemistry & Materials Research Center; NRI; 2000; Code:PEMPT02/5.- Electric Machines Department; Report of “Buying a generator and reverseengineering (Electric staff)”; Electric Power Systems Research Center; NRI; 2001;Code: PEMPT02/6/1.- Power Plant Mechanical Systems Department; Report of “Reverse engineering(Mechanic staff)”; Power Generation Research Center; NRI; 2001; Code:PEMPT02/6/2.- Metallurgy Department; Report of “Reverse engineering (Metallurgy staff)”;Chemistry & Materials Research Center; NRI; 2001; Code: PEMPT02/6/3.- Electric Machines Department; Report of “Determining design algorithm of smallsynchronous generators”; Electric Power Systems Research Center; NRI; 1999; Code:PEMPT02/7/1.8