Ultralow power ARM-based 32-bit MCU with 384 Kbytes Flash ... - Keil

STM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RDElectrical characteristics6.3.20 Temperature sensor characteristicsTable 64.T L(1)TS characteristicsSymbol Parameter Min Typ Max UnitV SENSE linearity with temperature ±1 ±2 °CAvg_Slope (1) Average slope TBD 1.66 TBD mV/°CV 110 Voltage at 110°C ±5°C (2)612 626.8 641.5 mVI DDA (TEMP) (3) Current consumption 3.4 6 µA(3)t START Startup time 10(4)(3)T S_tempADC sampling time when reading theµs5 10temperature1. Guaranteed by characterization, not tested in production.2. Measured at V DD = 3 V ±10 mV. V110 ADC conversion result is stored in the TS_Factory_CONV_V110byte.3. Guaranteed by design, not tested in production.4. Shortest sampling time can be determined in the application by multiple iterations.6.3.21 ComparatorTable 65.Comparator 1 characteristicsSymbol Parameter Conditions Min (1) Typ Max (1)UnitV DDA Analog supply voltage 1.65 3.6 VR 400K R 400K value 400kΩR 10K R 10K value 10Comparator 1 inputV IN0.6 Vvoltage rangeDDA Vt START Comparator startup time 7 10µstd Propagation delay (2)3 10Voffset Comparator offset ±3 ±10 mVd Voffset /dtComparator offsetvariation in worst voltagestress conditionsI COMP1 Current consumption (3)V DDA = 3.6 VV IN+ = 0 VV IN- = V REFINTT A = 25 ° C1. Based on characterization, not tested in production.0 1.5 10 mV/1000 h2. The delay is characterized for 100 mV input step with 10 mV overdrive on the inverting input, the noninvertinginput set to the reference.3. Comparator consumption only. Internal reference voltage not included.160 260 nADoc ID 022268 Rev 2 111/124