Ultralow power ARM-based 32-bit MCU with 384 Kbytes Flash ... - Keil

STM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RDElectrical characteristicsTable 19.Typical and maximum current consumptions in Stop mode (continued)Symbol Parameter Conditions Typ Max (1) UnitI DD(WUfromStop)Supply currentduring wakeupfrom Stop modeMSI = 4.2 MHzMSI = 1.05 MHzMSI = 65 kHzT A = -40°C to 25°CTBDTBDTBDmA1. Based on characterization, not tested in production, unless otherwise specified2. LCD enabled with external VLCD, static duty, division ratio = 256, all pixels active, no LCD connected3. LCD enabled with external VLCD, 1/4 duty, 1/3 bias, division ratio = 64, all pixels active, no LCD connected.4. Based on characterization done with a 32.768 kHz crystal (MC306-G-06Q-32.768, manufacturer JFVNY)with two 6.8 pF loading capacitors.5. Tested in production.Table 20.Typical and maximum current consumptions in Standby modeSymbol Parameter Conditions Typ Max (1) UnitT A = -40 °C to 25 °C 1.3 1.9I DD Supply current in Standby(Standbymode with RTC enabledwith RTC)I DD Supply current in Standby(Standby) mode (RTC disabled)RTC clocked by LSI (noindependent watchdog)T A = 55 °C 1.5 2.2T A = 85 °C 2.15 4T A = 105 °C 3.8 8.3 (2)independent watchdog) (3) T A = 85 °C TBDT A = -40 °C to 25 °C TBDRTC clocked by LSE (no T A = 55 °C TBDT A = 105 °C TBDIndependent watchdog andLSI enabledIndependent watchdog andLSI OFFT A = -40 °C to 25 °C 1.3 1.7T A = -40 °C to 25 °C 0.35 0.6T A = 55 °C 0.47 0.9T A = 85 °C 1.2 2.75T A = 105 °C 2.9 7 (2)µAI DDSupply current during wakeup(WU fromfrom Standby modeStandby)T A = -40 °C to 25 °CTBD1. Based on characterization, not tested in production, unless otherwise specified2. Tested in production.3. Based on characterization done with a 32.768 kHz crystal (MC306-G-06Q-32.768, manufacturer JFVNY) with two 6.8pFloading capacitors.Doc ID 022268 Rev 2 61/124