Ultralow power ARM-based 32-bit MCU with 384 Kbytes Flash ... - Keil

Electrical characteristicsSTM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RDTable 22.Peripheral current consumption (1) (continued)Typical consumption, V DD = 3.0 V, T A = 25 °CPeripheralRange 1,V CORE =1.8 VVOS[1:0] =01Range 2,V CORE =1.5 VVOS[1:0] =10Range 3,V CORE =1.2 VVOS[1:0] =11Low powersleep andrunUnitSYSCFG &RITBD TBD TBD TBDTIM9 TBD TBD TBD TBDAPB2TIM10 TBD TBD TBD TBDTIM11 TBD TBD TBD TBDADC (2) TBD TBD TBD TBDSPI1 TBD TBD TBD TBDUSART1 TBD TBD TBD TBDGPIOA TBD TBD TBD TBDGPIOB TBD TBD TBD TBDGPIOC TBD TBD TBD TBDµA/MHz(f HCLK )GPIOD TBD TBD TBD TBDAHBGPIOE TBD TBD TBD TBDGPIOF TBD TBD TBD TBDCRC TBD TBD TBD TBDAES TBD TBD TBD TBDFLASH TBD TBD TBD TBDDMA1 TBD TBD TBD TBDAll enabled TBD TBD TBD TBDI DD (RTC)I DD (LCD)I (3)DD (ADC)(4)I DD (DAC)I DD (COMP1)TBDTBDTBDTBDTBDµAI DD (COMP2)Fast modeTBDSlow mode TBDI (5)DD (PVD / BOR) TBDI DD (IWDG)TBD1. Data based on differential I DD measurement between all peripherals OFF an one peripheral with clockenabled, in the following conditions: f HCLK = 32 MHz (range 1), f HCLK = 16 MHz (range 2), f HCLK = 4 MHz(range 3), f HCLK = 64kHz (Low power run/sleep), f APB1 = f HCLK , f APB2 = f HCLK , default prescaler value foreach peripheral. The CPU is in Sleep mode in both cases. No I/O pins toggling. Not tested in production.2. HSI oscillator is OFF for this measure.64/124 Doc ID 022268 Rev 2