Ultralow power ARM-based 32-bit MCU with 384 Kbytes Flash ... - Keil

Electrical characteristicsSTM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RDTable 66.Comparator 2 characteristicsSymbol Parameter Conditions Min Typ Max (1)UnitV DDA Analog supply voltage 1.65 3.6 VV IN Comparator 2 input voltage range 0 V DDA Vt STARTt d slowt d fastComparator startup timePropagation delay (2) in slow modePropagation delay (2) in fast modeFast mode 15 20Slow mode 20 251.65 V ≤V DDA ≤2.7 V 1.8 3.52.7 V ≤V DDA ≤3.6 V 2.5 61.65 V ≤V DDA ≤2.7 V 0.8 22.7 V ≤V DDA ≤3.6 V 1.2 4V offset Comparator offset error ±4 ±20 mVdThreshold/dtThreshold voltage temperaturecoefficientI COMP2 Current consumption (3)V DDA = 3.3VT A = 0 to 50 ° CV- = V REF+ , 3/4V REF+ ,1/2 V REF+ , 1/4 V REF+ .15 30Fast mode 3.5 5Slow mode 0.5 21. Based on characterization, not tested in production.2. The delay is characterized for 100 mV input step with 10 mV overdrive on the inverting input, the noninvertinginput set to the reference.3. Comparator consumption only. Internal reference voltage (necessary for comparator operation) is notincluded.µsppm/°CµA112/124 Doc ID 022268 Rev 2