Ultralow power ARM-based 32-bit MCU with 384 Kbytes Flash ... - Keil

Electrical characteristicsSTM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RD6.3.7 PLL characteristicsThe parameters given in Table 30 are derived from tests performed under ambienttemperature and V DD supply voltage conditions summarized in Table 10.Table 30.SymbolPLL characteristicsParameterValueMin Typ Max (1)f PLL_INPLL input clock duty cycle 45 55 %PLL input clock (2)2 24 MHzf PLL_OUT PLL output clock 2 32 MHzt LOCKWorst case PLL lock timePLL input = 2 MHzPLL VCO = 96 MHz1. Based on characterization, not tested in production.Unit100 130 µsJitter Cycle-to-cycle jitter ± 600 psI DDA (PLL) Current consumption on V DDA 220 450I DD (PLL) Current consumption on V DD 120 1502. Take care of using the appropriate multiplier factors so as to have PLL input clock values compatible withthe range defined by f PLL_OUT .µA6.3.8 Memory characteristicsThe characteristics are given at T A = -40 to 105 °C unless otherwise specified.RAM memoryTable 31.RAM and hardware registersSymbol Parameter Conditions Min Typ Max UnitVRM Data retention mode (1)STOP mode (or RESET) 1.65 V1. Minimum supply voltage without losing data stored in RAM (in Stop mode or under Reset) or in hardwareregisters (only in Stop mode).74/124 Doc ID 022268 Rev 2