Ultralow power ARM-based 32-bit MCU with 384 Kbytes Flash ... - Keil

Electrical characteristicsSTM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RDTable 11.Functionalities depending on the operating power supply rangeFunctionalities depending on the operating power supply rangeOperating powersupply rangeDAC and ADCoperationUSB V CORECPUfrequencyMaximum(f CPU max)I/O operationV DD = 1.65 to 1.8 VNot functionalNotfunctionalRange 2 orrange 316 MHz(1ws)8MHz(0ws)Degraded speedperformanceV DD = 1.8 to 2.0 VConversiontime up to 500KspsNotfunctionalRange 2 orrange 316 MHz(1ws)8MHz(0ws)Degraded speedperformanceV DD = 2.0 to 2.4 VConversiontime up to500 KspsFunctional (1)Range 1, range2 or range 332 MHz(1ws)16MHz(0ws)Full speed operationV DD = 2.4 to 3.6 VConversiontime up to1 MspsFunctional (1)Range 1, range2 or range 332 MHz(1ws)16MHz(0ws)Full speed operation1. To be USB compliant from the IO voltage standpoint, the minimum V DD is 3.0 V.6.3.2 Embedded reset and power control block characteristicsTable 12.The parameters given in the following table are derived from the tests performed under theambient temperature condition summarized in Table 10.Embedded reset and power control block characteristicsSymbol Parameter Conditions Min Typ Max Unitt VDD(1)V DD rise time rateV DD fall time rateBOR detector enabled 0 ∞BOR detector disabled 0 1000BOR detector enabled 20 ∞BOR detector disabled 0 1000µs/VT RSTTEMPO(1)Reset temporizationV DD rising, BOR enabled 2 3.3V DD rising, BOR disabled 0.4 0.7 1.6ms52/124 Doc ID 022268 Rev 2