EMIS Interface Description - Measurement Solutions

Sening®
Innovative Tank Truck Systems
4 Variablendefinition
Specification
Euro Interface EMIS
Interface Description
The use of upper and lower case letters is irrelevant to the interpretation (syntax), and is used
simply to clarify the hierarchy.
4.1 ADMIN – (EMIS)
ADMIN-Variables Remarks Access Length
Serial e.g. “18DL0001” R 10
Name e.g. “EMIS2“ R 15
DEVICE HWVersion e.g. “02.00EMIS2“ R 10
SWVersion e.g. “03.12EMIS2“ R 10
Node CAN-bus node no.of the device typisch “21“ R 2
LastError See table in Chapter 5 / page 51 R 50
STATUS
Mode
e.g. “Ready”: Ready for operation
(see chap. 3.5 / page 16 )
R 10
Reset
Setting (SET) this variable releases a
software RESET
W 15
VEHICLE Name e.g. license plate number “HH AB 123“ R/W 15
Date Date e.g. “01.01.2005“ R/W 10
Time Time e.g. “01:01:10“
(Daylight Saving Time)
“0” no automatic summer winter time
R/W 8
CLOCK AutoDST
daylight saving
“1” automatic summer winter time daylight
saving on last Sunday in March and on
last Sunday in October respectively
R/W 1
CurrentDST
“0” current time is wintertime
“1” current time is summertime
R 1
Version „2.10“, corresponds to available specification
Setting (SET) this variable releases an
R 15
Ping
autom. REPORT telegram. It serves the
connection for the examination.
W 15
Meters
Number of max. supported meters:
typical “3“
R 2
PROTOCOL
OPTION
QAS
OBC
PRN
Number of max. supported QAS:
typical “1“
Number of max. supported QBCs:
typical “1“
Number of max. supported Printer:
typical “1“
R
R
R
2
2
2
COM
Number of max. supported serial interfaces:
typical "2"
R 2
GPS
Number of max. supported GPS module:
typical “1“
R 2
MNF19002EUS / DOK-411E Rev. 2.00 / MB / jp / Juli 2008 25
1
2
3
4
5
6
7
8
9
A
Variablendefinition