EMIS Interface Description - Measurement Solutions

Specification
Euro Interface EMIS
Interface Description
7 - Transmission of customer information
Sening®
Innovative Tank Truck Systems
Customer related information (e.g. customer number) can be transmitted optional. If supported
by the measuring system, this data can be printed together with the measuring results on the
original receipt.
Direction Telegram
EMIS SET,METER,ORDERS,CUSTOMER=“12345678“
OBC
The transmission has been acknowledged by EMIS.
� Proceed with the program.
Direction Telegram
EMIS SET,METER,ORDERS,CUSTOMER=“123456789“
OBC
EMIS REQUEST,ADMIN,STATUS
OBC
REPORT,ADMIN,STATUS,LASTERROR="2000:string too long";
MODE="READY"
EMIS
The customer number exceeds the specified length (max. 8 chars.). EMIS answers with
and truncates the number to the max. length (in this example: “12345678”).
� Proceed with the program.
8 - Transmission of the presets to the measuring system(s)
Direction Telegram
EMIS SET,METER,ORDERS,ORDERCOUNT=“2“
OBC
OBC REPORT,METER,ORDERS,ORDERCOUNT=“2“
EMIS
EMIS was able to transmit the two presets to at least one measuring system.
� Proceed with the program.
Direction Telegram
EMIS SET,METER,ORDERS,ORDERCOUNT=“2“
OBC
OBC REPORT,METER,ORDERS,ORDERCOUNT=“0“
EMIS
EMIS konnte die Produktvorgaben nicht an die Messanlagen übertragen.
� perform error treatment (e.g. repeat from step 4).
62 Rev. 2.00 / MB / jp / Juli 2008 MNF19002EUS / DOK-411E