EMIS Interface Description - Measurement Solutions

Specification
Euro Interface EMIS
Interface Description
Footnotes:
Sening®
Innovative Tank Truck Systems
1 ) North-South specification according to NMEA 0183 $GPRMC + GPRMC
Example: 5343.3887N
2 ) East-West specification according to NMEA 0183 $GPRMC + GPRMC
Example: 01040.7877E
3 ) manufacturer-specific data field expansion, which is not specified in this way in DIN 26051
4 ) new manufacturer-specific data field identifier 91 (see appendix A …) / page 73)
Abbreviations:
KaNo Compartment number 1 to n, where 1 is the tank compartment following the driver’s
cab
AsNo Overfill prevention device number
PrCo Product code according to DIN 26051-1 (P53); can be expanded or changed in QAS
system
NoID CAN account number of the QAS unit (typical = 11)
TAG-No TAG No. 1 to 99
Explanation of the implementation of DOK-411 in TDL data sets:
• For "S" a time stamp acc. to DIN 26051-1 Table 10 in the
CCYYMMDDhhmmss form is to be used.
• The values of VALUE1 (VALUE2) are to be inserted for V1 (V2).
• For better readability, empty TDL fields have been represented by a comma plus a space.
Spaces are omitted in the TDL data set.
• Some DOK-411 event data leads to different TDL data sets.
These are separated by “/” .
• The implementation of some VALUEx in TDL data is effected according to the following scheme:
- The value of VALUEx e.g. "S" is replaced by the value in brackets e.g. (0).
- The order of the VALUEx values corresponds to the values inside the brackets.
38 Rev. 2.00 / MB / jp / Juli 2008 MNF19002EUS / DOK-411E