EMIS Interface Description - Measurement Solutions

Specification
Euro Interface EMIS
Interface Description
Water sensor - WTR
Identifier Identifier name Record
configuration
Field
index Description
826 NODE_CONF 826,S,N,C,N,N 4 Compartment no.
TDL Identifier 850 – new event information
5 Sensor status
Sening®
Economic Tank Truck Systems
EMIS "passes on" the data received from the QAS given a QAS,EVENT request to the OBC, i.e.
no analysis or formating takes place. This means that unknown events from revised QAS versions
can be easily handed on to the OBC. In contrast for the TDL output, the QAS data is changed into
a new format in the EMIS – something which of course is only possible with known data. To output
new and thus unknown data in the TDL format, the identifier is outputted with the possible 3
parameters in 3 strings.
Identifier Identifier name
Record
configuration
850 NODE_CONF 850,S,N,C,
C,C,C
Example:
Field
index Description
4 TYP (see Chapter 4.2.1 / Page 30)
5 VALUE1 (see Chapter 4.2.1)
6 VALUE2 (see Chapter 4.2.1)
Event / sensor TYPE VALUE1 VALUE2
XXX example XXX CoNo e.g. 3 “AB“ = passiv
“CD“ = active
“EF“ = not connected
“GH“ = short-circuit
“IJ“ = invalid / unknown
TDL unknown
Event report line from REQUEST,QAS,EVENT-query:
REPORT,QAS,EVENT,TYPE=“XXX“;VALUE1=“3“;VALUE2=“GH“;
DATE=“11.10.2005“;TIME=“17:40“
Event report line from REQUEST,TDL,L_FILE-query:
REPORT,TDL,L_FILE=850,20051011174000,11,FAS,XXX,3,GH
78 Rev. 2.00 / MB / jp / Juli 2008 MNF19002EUS / DOK-411E