Renamic - BIOTRONIK USA - News

More documents

Recommendations

Info

28 Using RenamicEmergencyProgramsRenamic features two emergency buttons that implement asafe program or deliver an emergency shock by pressing asingle button. Both buttons are located on the bottom leftcorner of the screen, as shown in Figure 8.Figure 8: Emergency Pacing/Shock ButtonsEmergency PacingEmergency pacing uses the following parameters:• Mode:VVI• Basic rate: 70 ppm• Pulse amplitude: 7.5 V• Pulse width: 1.5 msThese parameters are non-programmable. To deliveremergency pacing, establish telemetry contact by positioningthe PGH above the implanted device or by enabling theSafeSync RF telemetry. Press the button. EmergencyVVIpacing will immediately commence. This may be done withboth pacemakers and ICDs.
29 Using RenamicTo stop emergency pacing, load the Parameters screen.Program the desired permanent parameters and transferthem to the implanted device.Emergency ShockThe emergency shock (ICDs only) is delivered with thefollowing non-programmable specifications:• Waveform: Biphasic• Delivery Type: Synchronized with an R-wave• Energy: Maximum energyTo deliver an emergency shock, establish telemetry contactby positioning the PGH above the implanted device or byenabling the SafeSync RF telemetry. Press the button. Inthe dialog window, select EMERGENCY SHOCK. The ICD willimmediately begin charging and deliver a shock.Note: The emergency shock is a committed shock. Press thebutton only once each time you want to deliver a shock.Pressing the button multiple times (even as the device ischarging and there is no telemetry contact) may result inextra shocks being delivered.
Page 3 and 4: 1Table of ContentsIndications for U
Page 5 and 6: 3 Table of ContentsSupplementary In
Page 7: 5Indications and Contraindications
Page 11: 9 Warnings and Precautionstouching
Page 14 and 15: 12 General Safety InstructionsGener
Page 16 and 17: 14 General Safety InstructionsElect
Page 18 and 19: 16 General Safety InstructionsSensi
Page 20 and 21: 18 Device OverviewDevice OverviewAn
Page 22 and 23: 20 Device OverviewFigure 3: Power c
Page 25 and 26: 23 Start UpECG Port and USB Device
Page 28 and 29: 26 Start UpWhen possible, use the O
Page 32 and 33: 30 Using RenamicTelemetryThe progra
Page 34 and 35: 32 Using RenamicLED Status (flashin
Page 36 and 37: 34 Using RenamicUsing theInternal P
Page 38 and 39: 36 Using RenamicPrintingFigure 12:
Page 40 and 41: 38 Renamic PSAOverviewRenamic PSATh
Page 42 and 43: 40 Renamic PSAConnecting thepatient
Page 44 and 45: 42 Renamic PSAa. Rate - current rat
Page 46 and 47: 44 Renamic PSAParameter Range Remar
Page 48 and 49: 46 Renamic PSAFigure 17: Saving mea
Page 50 and 51: 48 Renamic PSAFigure 19: Burst paci
Page 52 and 53: 50 Renamic PSAFigure 21: Completed
Page 54 and 55: 52 Renamic PSAFigure 23: Sensing te
Page 56 and 57: 54 Renamic PSAFigure 25: Threshold
Page 58 and 59: 56 Renamic PSAFigure 27: Adjust scr
Page 60: 58 Renamic PSAFigure 28: The Freeze
Page 63 and 64: 61 Renamic PSAFigure 31: ID NumberF
Page 65: 63 Renamic PSAFigure 34: Date of Bi
Page 68 and 69: 66 Renamic PSAHospitaland CityThe h
Page 71 and 72: 69 Renamic PSATypeThe type of lead
Page 73 and 74: 71 Renamic PSAIf a device is interr
Page 75 and 76: 73 MaintenanceMaintenanceTo clean a
Page 77 and 78: 75 SafetyOperatingConditions• Do
Page 79 and 80: 77 Technical DataTechnical DataSee
Page 81 and 82:
79 Technical DataInternal printerCa
Page 83 and 84:
81 Supplementary InformationSupplem
Page 85 and 86:
83 Supplementary InformationUL-cert
Page 88 and 89:
86 Symbols on the ComponentsThe sym
Page 90 and 91:
88 Symbols on the ComponentsLegend
Page 94:
M4147-B 07/13© 2013 BIOTRONIK, Inc
show all

Renamic - BIOTRONIK USA - News

Create successful ePaper yourself

Delete template?

Save as template?