Renamic - BIOTRONIK USA - News

45 Renamic PSAPreferredSettingsThe Preferred Settings button allows the user to select savedparameter settings or set new default preference settings.Figure 16: Preferred settingsSavingMeasurementsLoad – Loads a previously saved program.Save – Saves a user defined program into the memory. Onlyone program may be stored.Factory settings – Resets the program to the preset factoryprogram. Also clears any save program.Cancel – Closes the Preferred Settings screen.To save measurements, select the desired channel. Selectthe measurement to be saved. Refer to Figure 17 for anexample of saving an RV measurement. For example, if anRV sensing measurement is being performed, select the RVchannel (blue box) and press Sensing (green box). This savesthe data to the report page. A message stating the value wassaved to the programmer will be displayed on the messageline.