Renamic - BIOTRONIK USA - News

More documents

Recommendations

Info

60 <strong>Renamic</strong> PSAbetween the calipers at 25 mm per second paper speed.1-2 Caliper 50 mm/s – prints/saves only the informationbetween the calipers at 50 mm per second paper speed.These are printed by pressing the print button in the bottomright corner of the screen, as shown in Figure 29.The Store button below the Window content stores the frozeninformation to the programmer for later viewing.The table in the upper right portion of the screen shows thesignal amplitude that crosses the calipers.The Close button turns off the freeze and returns theprogrammer to standard function.IDPatient DataPatient data can be added to the PSA file, which is stored inthe programmer. This allows user to go back and review filesfor a specific patient if needed. The data is similar to the datafields of the implanted device.The patient data section is found under the Report tab of thePSA module.This section allows the user to input up to a twelve-digit codeto serve as a patient identifier. This may be a medical recordsnumber or a study number if the patient is enrolled in a study.
61 <strong>Renamic</strong> PSAFigure 31: ID NumberFirst Name/Last NameThese sections allows the user to input the patient’s first andlast name into the PSA file. This is a free text box, allowingup to 19 characters for the first name, as well as for the lastname. Enter the patient’s name and select the enter key.Figure 32: First NameFigure 33: Last Name
Page 3 and 4:
1Table of ContentsIndications for U
Page 5 and 6:
3 Table of ContentsSupplementary In
Page 7:
5Indications and Contraindications
Page 11: 9 Warnings and Precautionstouching
Page 14 and 15: 12 General Safety InstructionsGener
Page 16 and 17: 14 General Safety InstructionsElect
Page 18 and 19: 16 General Safety InstructionsSensi
Page 20 and 21: 18 Device OverviewDevice OverviewAn
Page 22 and 23: 20 Device OverviewFigure 3: Power c
Page 25 and 26: 23 Start UpECG Port and USB Device
Page 28 and 29: 26 Start UpWhen possible, use the O
Page 30 and 31: 28 Using RenamicEmergencyProgramsRe
Page 32 and 33: 30 Using RenamicTelemetryThe progra
Page 34 and 35: 32 Using RenamicLED Status (flashin
Page 36 and 37: 34 Using RenamicUsing theInternal P
Page 38 and 39: 36 Using RenamicPrintingFigure 12:
Page 40 and 41: 38 Renamic PSAOverviewRenamic PSATh
Page 42 and 43: 40 Renamic PSAConnecting thepatient
Page 44 and 45: 42 Renamic PSAa. Rate - current rat
Page 46 and 47: 44 Renamic PSAParameter Range Remar
Page 48 and 49: 46 Renamic PSAFigure 17: Saving mea
Page 50 and 51: 48 Renamic PSAFigure 19: Burst paci
Page 52 and 53: 50 Renamic PSAFigure 21: Completed
Page 54 and 55: 52 Renamic PSAFigure 23: Sensing te
Page 56 and 57: 54 Renamic PSAFigure 25: Threshold
Page 58 and 59: 56 Renamic PSAFigure 27: Adjust scr
Page 60: 58 Renamic PSAFigure 28: The Freeze
Page 65: 63 Renamic PSAFigure 34: Date of Bi
Page 68 and 69: 66 Renamic PSAHospitaland CityThe h
Page 71 and 72: 69 Renamic PSATypeThe type of lead
Page 73 and 74: 71 Renamic PSAIf a device is interr
Page 75 and 76: 73 MaintenanceMaintenanceTo clean a
Page 77 and 78: 75 SafetyOperatingConditions• Do
Page 79 and 80: 77 Technical DataTechnical DataSee
Page 81 and 82: 79 Technical DataInternal printerCa
Page 83 and 84: 81 Supplementary InformationSupplem
Page 85 and 86: 83 Supplementary InformationUL-cert
Page 88 and 89: 86 Symbols on the ComponentsThe sym
Page 90 and 91: 88 Symbols on the ComponentsLegend
Page 94: M4147-B 07/13© 2013 BIOTRONIK, Inc
show all

Renamic - BIOTRONIK USA - News

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?