Renamic - BIOTRONIK USA - News

More documents

Recommendations

Info

50 <strong>Renamic</strong> PSAFigure 21: Completed report pageThe patient data section, shown in Figure 22, allows the userto input patient data similar to what may be stored in animplanted device. However, the data is not transferable to animplantable device. The data is stored in a file within the datamanager of the programmer.Note: this section is not available if the device to be implantedhas already been interrogated. In other words, if the device tobe implanted has been interrogated it is assumed the patientinformation will be added to the device.The PSA file created will become part of the interrogateddevice file within the data manager of the programmer.
51 <strong>Renamic</strong> PSAFigure 22: Patient data screenSensingImplant TestingAfter the lead is connected to the PSA module, the unfilteredIEGM signal will appear with sensing values on the displayscreen and in the real-time measurement section to the rightof the display screen, as shown in Figure 23. To save the datato the programmer, select the chamber being tested in theSave measurement section. The RV channel is selected andshown in the blue box. Pressing the Sensing button (greenbox) will save the sensed data for the selected chamber in theReport screen. A message stating “Values saved” (red box)will appear on the message bar.Figure 23 shows a sensing test for the RV lead beingperformed, though all connected lead values will bedisplayed.
Page 3 and 4: 1Table of ContentsIndications for U
Page 5 and 6: 3 Table of ContentsSupplementary In
Page 7: 5Indications and Contraindications
Page 11: 9 Warnings and Precautionstouching
Page 14 and 15: 12 General Safety InstructionsGener
Page 16 and 17: 14 General Safety InstructionsElect
Page 18 and 19: 16 General Safety InstructionsSensi
Page 20 and 21: 18 Device OverviewDevice OverviewAn
Page 22 and 23: 20 Device OverviewFigure 3: Power c
Page 25 and 26: 23 Start UpECG Port and USB Device
Page 28 and 29: 26 Start UpWhen possible, use the O
Page 30 and 31: 28 Using RenamicEmergencyProgramsRe
Page 32 and 33: 30 Using RenamicTelemetryThe progra
Page 34 and 35: 32 Using RenamicLED Status (flashin
Page 36 and 37: 34 Using RenamicUsing theInternal P
Page 38 and 39: 36 Using RenamicPrintingFigure 12:
Page 40 and 41: 38 Renamic PSAOverviewRenamic PSATh
Page 42 and 43: 40 Renamic PSAConnecting thepatient
Page 44 and 45: 42 Renamic PSAa. Rate - current rat
Page 46 and 47: 44 Renamic PSAParameter Range Remar
Page 48 and 49: 46 Renamic PSAFigure 17: Saving mea
Page 50 and 51: 48 Renamic PSAFigure 19: Burst paci
Page 54 and 55: 52 Renamic PSAFigure 23: Sensing te
Page 56 and 57: 54 Renamic PSAFigure 25: Threshold
Page 58 and 59: 56 Renamic PSAFigure 27: Adjust scr
Page 60: 58 Renamic PSAFigure 28: The Freeze
Page 63 and 64: 61 Renamic PSAFigure 31: ID NumberF
Page 65: 63 Renamic PSAFigure 34: Date of Bi
Page 68 and 69: 66 Renamic PSAHospitaland CityThe h
Page 71 and 72: 69 Renamic PSATypeThe type of lead
Page 73 and 74: 71 Renamic PSAIf a device is interr
Page 75 and 76: 73 MaintenanceMaintenanceTo clean a
Page 77 and 78: 75 SafetyOperatingConditions• Do
Page 79 and 80: 77 Technical DataTechnical DataSee
Page 81 and 82: 79 Technical DataInternal printerCa
Page 83 and 84: 81 Supplementary InformationSupplem
Page 85 and 86: 83 Supplementary InformationUL-cert
Page 88 and 89: 86 Symbols on the ComponentsThe sym
Page 90 and 91: 88 Symbols on the ComponentsLegend
Page 94: M4147-B 07/13© 2013 BIOTRONIK, Inc

Renamic - BIOTRONIK USA - News

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?