Renamic - BIOTRONIK USA - News

More documents

Recommendations

Info

56 <strong>Renamic</strong> PSAFigure 27: Adjust screenSpeedAdjusts the sweep speed of the display.ECGSelects the ECG lead to be visualized during testing. Acheck box underneath the ECG section allows the user touse the far-field signal instead of the ECG for devices thatuse a far-field signal. The checkbox will only apply to thoseimplantable devices capable of transmitting a far-field signal.Color schemeChanges the color scheme of the ECG/IEGM display to whiteon-blackor black-on-white and the colors of the channeldisplay.AC FrequencyAllows the user to choose 50 Hz or 60 Hz frequency. It isrecommended to keep at 60 Hz.
57 <strong>Renamic</strong> PSAFreezeScreenGainAnother method to adjust the size of the on-screen signal forECGs and IEGMs.FilterAllows the user to choose a filtered or unfiltered signal.Overwrite / ContinuousTwo options are available for choosing how data crosses thescreen. The Overwrite mode brings new information in fromthe right side of the screen. The Continuous mode bringsnew information in from the left side of the screen.StandardResets the settings to a standard default.StoreStores into memory any changes made by the user.ClosesCloses the adjust window with changes.The freeze icon may be used to capture a snapshot of theIEGM. Calipers will appear with the snapshot, allowing theuser to measure intracardiac distances and amplitude values.Calipers can be adjusted by touching the vertical dotted lineson the screen, as shown in Figure 28, or by using the arrowson the right side of the screen.
Page 3 and 4:
1Table of ContentsIndications for U
Page 5 and 6:
3 Table of ContentsSupplementary In
Page 7: 5Indications and Contraindications
Page 11: 9 Warnings and Precautionstouching
Page 14 and 15: 12 General Safety InstructionsGener
Page 16 and 17: 14 General Safety InstructionsElect
Page 18 and 19: 16 General Safety InstructionsSensi
Page 20 and 21: 18 Device OverviewDevice OverviewAn
Page 22 and 23: 20 Device OverviewFigure 3: Power c
Page 25 and 26: 23 Start UpECG Port and USB Device
Page 28 and 29: 26 Start UpWhen possible, use the O
Page 30 and 31: 28 Using RenamicEmergencyProgramsRe
Page 32 and 33: 30 Using RenamicTelemetryThe progra
Page 34 and 35: 32 Using RenamicLED Status (flashin
Page 36 and 37: 34 Using RenamicUsing theInternal P
Page 38 and 39: 36 Using RenamicPrintingFigure 12:
Page 40 and 41: 38 Renamic PSAOverviewRenamic PSATh
Page 42 and 43: 40 Renamic PSAConnecting thepatient
Page 44 and 45: 42 Renamic PSAa. Rate - current rat
Page 46 and 47: 44 Renamic PSAParameter Range Remar
Page 48 and 49: 46 Renamic PSAFigure 17: Saving mea
Page 50 and 51: 48 Renamic PSAFigure 19: Burst paci
Page 52 and 53: 50 Renamic PSAFigure 21: Completed
Page 54 and 55: 52 Renamic PSAFigure 23: Sensing te
Page 56 and 57: 54 Renamic PSAFigure 25: Threshold
Page 60: 58 Renamic PSAFigure 28: The Freeze
Page 63 and 64: 61 Renamic PSAFigure 31: ID NumberF
Page 65: 63 Renamic PSAFigure 34: Date of Bi
Page 68 and 69: 66 Renamic PSAHospitaland CityThe h
Page 71 and 72: 69 Renamic PSATypeThe type of lead
Page 73 and 74: 71 Renamic PSAIf a device is interr
Page 75 and 76: 73 MaintenanceMaintenanceTo clean a
Page 77 and 78: 75 SafetyOperatingConditions• Do
Page 79 and 80: 77 Technical DataTechnical DataSee
Page 81 and 82: 79 Technical DataInternal printerCa
Page 83 and 84: 81 Supplementary InformationSupplem
Page 85 and 86: 83 Supplementary InformationUL-cert
Page 88 and 89: 86 Symbols on the ComponentsThe sym
Page 90 and 91: 88 Symbols on the ComponentsLegend
Page 94: M4147-B 07/13© 2013 BIOTRONIK, Inc
show all

Renamic - BIOTRONIK USA - News

Create successful ePaper yourself

Delete template?

Save as template?