Renamic - BIOTRONIK USA - News

More documents

Recommendations

Info

38 Renamic PSAOverviewRenamic PSAThe Renamic Pacing System Analyzer (PSA) is used duringthe implantation of pacemakers and defibrillators to evaluatethe placement and integrity of pacing/defibrillator leadsand to determine the appropriate pacing parameters for theimplanted lead(s).Figure 13: Renamic start-up screenRenamic performs a self-test during startup and the LEDsare initially all illuminated in green. Once the self-test hasbeen completed successfully, the LEDs are switched off,and the PSA button can be selected on the Renamic userinterface.
39 Renamic PSAIf the self-test is not successful, the LEDs quickly flashyellow/green. If the LEDs are continuously lit yellow/greenafter the self-test, then the software of the PSA module isbeing updated. Table 4 provides a description of the RenamicPSA LEDs:LabelARVLVLEDcolorGreenYellowGreenYellowGreenYellowTable 4: Renamic PSA LEDsStatusAtrial sensingAtrial pacingRight ventricular sensingRight ventricular pacingLeft ventricular sensingLeft ventricular pacingThe following Table 5 provides a list of patient cables andadapters that can be used with the Renamic PSA:Renamic PSAConnectionName Order no. DetailsPatient cable PK-67-L 123 672Connects analyzer/implant module to 301-CG.8.5 ft longPatient cable PK-67-S 123 438Connects analyzer/implant module to 301-CG.18 in longTable 5: Renamic PSA Connections
Page 3 and 4: 1Table of ContentsIndications for U
Page 5 and 6: 3 Table of ContentsSupplementary In
Page 7: 5Indications and Contraindications
Page 11: 9 Warnings and Precautionstouching
Page 14 and 15: 12 General Safety InstructionsGener
Page 16 and 17: 14 General Safety InstructionsElect
Page 18 and 19: 16 General Safety InstructionsSensi
Page 20 and 21: 18 Device OverviewDevice OverviewAn
Page 22 and 23: 20 Device OverviewFigure 3: Power c
Page 25 and 26: 23 Start UpECG Port and USB Device
Page 28 and 29: 26 Start UpWhen possible, use the O
Page 30 and 31: 28 Using RenamicEmergencyProgramsRe
Page 32 and 33: 30 Using RenamicTelemetryThe progra
Page 34 and 35: 32 Using RenamicLED Status (flashin
Page 36 and 37: 34 Using RenamicUsing theInternal P
Page 38 and 39: 36 Using RenamicPrintingFigure 12:
Page 42 and 43: 40 Renamic PSAConnecting thepatient
Page 44 and 45: 42 Renamic PSAa. Rate - current rat
Page 46 and 47: 44 Renamic PSAParameter Range Remar
Page 48 and 49: 46 Renamic PSAFigure 17: Saving mea
Page 50 and 51: 48 Renamic PSAFigure 19: Burst paci
Page 52 and 53: 50 Renamic PSAFigure 21: Completed
Page 54 and 55: 52 Renamic PSAFigure 23: Sensing te
Page 56 and 57: 54 Renamic PSAFigure 25: Threshold
Page 58 and 59: 56 Renamic PSAFigure 27: Adjust scr
Page 60: 58 Renamic PSAFigure 28: The Freeze
Page 63 and 64: 61 Renamic PSAFigure 31: ID NumberF
Page 65: 63 Renamic PSAFigure 34: Date of Bi
Page 68 and 69: 66 Renamic PSAHospitaland CityThe h
Page 71 and 72: 69 Renamic PSATypeThe type of lead
Page 73 and 74: 71 Renamic PSAIf a device is interr
Page 75 and 76: 73 MaintenanceMaintenanceTo clean a
Page 77 and 78: 75 SafetyOperatingConditions• Do
Page 79 and 80: 77 Technical DataTechnical DataSee
Page 81 and 82: 79 Technical DataInternal printerCa
Page 83 and 84: 81 Supplementary InformationSupplem
Page 85 and 86: 83 Supplementary InformationUL-cert
Page 88 and 89: 86 Symbols on the ComponentsThe sym
Page 90 and 91:
88 Symbols on the ComponentsLegend
Page 94:
M4147-B 07/13© 2013 BIOTRONIK, Inc
show all

Renamic - BIOTRONIK USA - News

Create successful ePaper yourself

Delete template?

Save as template?