Renamic - BIOTRONIK USA - News

73 MaintenanceMaintenanceTo clean and disinfect Renamic, follow the instructions below:• Use soft, lint-free cloths.• Clean the housing with a damp cloth and mild soapsolution or 70% isopropanol.• Disinfect with alcohol or aldehyde-based agents suchas Aerodesin 2000, Fugaten spray, Lysoformin 2000 orAldasan 2000.• Vacuum the ventilation slots regularly.• Visually inspect the connections: make sure that thecontacts for all connections and cables are clean and freeof any type of dirt.• To disinfect the patient cable and patient adapter, use amixture of 70% isopropanol and 30% water, or if usingLysoformin 3000 allow 15 minutes at 2% concentration forit to take effect.Neither Renamic nor the PGH can be sterilized. To use thePGH inside of the sterile field, a sterile wand cover must beplaced over the programming head and cord.