Renamic - BIOTRONIK USA - News

37 Using RenamicECG and IEGMFunctionsTakingScreenshotsThe IEGMs received from the implanted device and surfaceECG can be displayed and printed simultaneously. Therecording of the surface ECG is independent of otherfunctions, so the implanted device can be interrogated andprogrammed during the ongoing ECG display. The recordedelectrograms can be saved and measured using calipers.When the ECG is overmodulated, the signal is displayed onlyas a solid line on the upper frame of the ECG window. To fix theovermodulation, test the lead contacts, remove other devicesfrom the patient, and turn off the sources of interference.To take a snapshot of the current screen displayed onRenamic, follow the instructions listed below:1. Make sure that the USB drive on which you wish to storethe image is plugged into one of the available USB ports.See page 23.2. Pull out the printer paper tray as if you were going toreplace the paper. The printer tray must be out in order totake screenshots.3. Press and hold the button.4. While holding the button, press and release the10 button.The screenshot is now saved to the USB stick as a PNG file.