Renamic - BIOTRONIK USA - News

75 SafetyOperatingConditions• Do not use this device as a life support system.• Protect the device from accidental contact with fluids.• During implantation procedures, ensure the patient’s heartrate is monitored using an ECG monitor or ECG recorder.• During defibrillation, do not touch the patient, theprogrammer the patient is connected to, or the attachedaccessories. Otherwise, there is a danger that the usermay suffer an electrical shock.If the package is damaged, contact BIOTRONIK immediately.Do not put the device into operation.Mechanical impact, e.g., dropping the unit, can permanentlyimpair the function of the device. Do not use the device if itshows visible damage. Contact BIOTRONIK for testing and, ifnecessary, repair of the equipment.Replace any cables that show even slight damage. Ensurethat the contacts of all connections and plugs are clean.Ensure that no condensation on the plugs or connector portsexists prior to use. If condensation is present, dry before use.Place the device on a flat, dry surface so that the patient canonly come into contact with the applied parts, namely theprogramming head and ECG cable.