Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Electric and cordless toolsCore drilling unitsContinued next pageChisel with SDS-max shankfor drill hammers with rotation stopShape Pointed chisel Flat chisel Floor chiselLength mm 400 400 300Cutting width mm – 25 5070175 Ident. No. 712 722 751Unit price E O.R. O.R. O.R.Prod. Gr. 732Ident. No. 712Ident. No. 722Continued next pageElectromagnetic drill unit BUX Voltage, 230 V, 50 Hz, bore diameter up to 16 mmConsisting of:BUX DAH 16 electromagnetic drill stand with safety switch, protection category IIWorking strokeOblong base formBosch Electronic hand drilling machine GBM 16-2REDrilling in steel up to ØNo load speedPower input/outputWith toothed rim drill chuck, clamping rangeMachine holder part No. 9646207 mm186 x 90 mm16 mm0-380/0-880 1 /min1050/570 W3-16 mmTotal weight Kg 2270125 Ident. No. 006dUnit price E O.R.d = Delivered ex works, postage and packaging excluded. Prod. Gr. 706Continued next pageElectromagnetic drill unit BUX Voltage, 230 V, 50 Hz, bore diameter up to 32 mmConsisting of:BUX DAH 32-RP electromagnetic drill stand with safety switch, protection category IIWorking stroke270 mmOblong base form252 x 126 mmRevolving 330°Moveable25 mmBOSCH four-speed drilling machine GBM 32-4Drilling in steel up to Ø32 mmNo load speed120/185/265/420 1 /minPower input/output1500/1000 WTool holding fixture MT 3Machine holder 9686Total weightKg70125 Ident. No. 017dUnit price E (O.R.)d = Delivered ex works, postage and packaging excluded. Prod. Gr. 706Continued next pageElectromagnetic drill stands BUXVoltage 230 V, 50 Hz, q shock proof, noise suppressed, with safety circuitFor drilling machines up to Ø 32 mm boring capacity.No. 70126 the drill stands No. 70126 are suitable for mounting drilling machines of all types andmakes. Mountingready attachments (see No. 70136) are available off the shelf for various models.While ordering a model-specific machine attachment, it is necessary to specify the make, model and spindleneck Ø of the machine to be used. All magnet stands are equipped with safety belt.It is possible to perform drilling and threading operation anywhere, where there is electricity available, withmagnetic stands and drilling machines. In every position: vertical, horizontal or overheads. After switching on,the magnet-foot holds on, both hands are free for the activation of feed.No. 70136 for drills with 43 mm and 57 mm spindle neck Ø (only for DAH 16)Model DAH 16 DAH 32-RPFor drill up to Ø mm 16 32Version rigid adjustableRevolving ° – 330Moveable mm – 25Feed manually manuallyWorking stroke mm 207 270Magnet holding force kN 9,5 18Max. pressure on drill kN 4 11Overall height mm 380 620Power consumption W 50 90Base form oblong oblongDimensions mm 186 x 90 252 x 126Weight Kg 18 3270126 Ident. No. 005d 015dUnit price E O.R. O.R.Type 9646 –70136 Machine holder Ident. No. 050 –Unit price E O.R. –d = Delivered ex works, postage and packaging excluded.h Machine holder not included, see No. 70136 and on request.Prod. Gr. 706Example of applicationElectric Tools2010/111199