Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Handling technologyLoad lifting magnetsContinued next pagePermanent hoisting magnets BUX NEO AIRwith integrated pneumatic pistonApplication: for flat and round material, for the intensive use of handling devices and robots.Execution: with 2 long poles and Vee blocks, high-grade neodymium as the magnetic material,with integrated pneumatic cylinder for effortless switching on and off, with a robust load lug.Advantage: The operation safety of these devices in automated systems is high compared to batterypoweredmagnets and electromagnets. The advantage lies in the safety in the event of a cable breaking orthe power failing.Accessories: Operating elements and sensors for sensing the switch position available at extra costDelivery: with operating instructions and test certificateModel NEO-AIR 250 NEO-AIR 500Carrying capacity* for flat material Kg 250 500Carrying capacity* for round stock Kg 125 250For a min. / max. round material Ø mm 60-200 60-250Length x width mm 152 x 120 224 x 120Height / height including lug mm 291 / 371 291 / 371Compressed-air requirement nominal bar 6 6Connecting thread G 1 / 8 G 1 / 8Weight Kg 25 3877301 Ident. No. 002d 004dUnit price E (O.R.) (O.R.)d = Delivered ex works, postage and packaging excluded.Prod. Gr. 706* The carrying capacity applies for a machined steel plate (St37), thickness 50 mm. This varies dependingon the workpiece material, the thickness and the quality of the contact surfaces.Ident. No. 002Ident. No. 004Electric toolsContinued next pagePermanent hoisting magnets BUXApplication: for vertical operation, for lifting and pivoting of flat stock by 90° For easy loading of machinecentres and lathes as well as for moving loads from a horizontal to a vertical position and vice versa.Execution: ON and OFF switching activated by turning the hand lever, with safety locking device. Equippedwith high quality neodymium magnet material. The swivel arm attached diagonally to the magnets is adjustableto the size of the work piece and is equipped with stopper with two-point support. This stopper isimportant for vertical transportation. With adjustable load lug for setting the centre of gravity. Separateswivel arm for expansion of existing BUX load lifting magnets NEO 250 and NEO 500 are available underthe Ident. No. 018 and 023. Easy assembly and disassembly in just a few minutes.Scope of delivery: with test certificate.Model NEO-HV 250 NEO-HV 500Carrying capacity for flat material Kg 250 500Holding force tested * Kg 800 1600Length x width mm 958x210 1158x275Magnet height with lug mm 255 255for a component width or Ø mm 300-800 300-1000For work piece thickness from mm 4 6Weight Kg 27 3877305 Ident. No. 017 022Unit price E O.R. (O.R.)Swivelling arm for conversion of NEO 250 NEO 50077305 Ident. No. 018 023Unit price E O.R. O.R.* The tested carrying capacity is determined on a steel plate (St 37) with ground surface and a thicknessof 50 mm.Prod. Gr. 706Vertical lifting1344 2010/11