Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Workshop accessoriesCompressed-air devicesContinued next pageParking station for blow-off air gunsApplication: for nearly all usual types of blow-off and/or compressed air guns without adapter pieces etc.,just by turning the holder to the required position. Firmly fixed even under rough work conditions of everyday,no label fixing on few points with the risk of falling down when just being slightly touched, but formfitembracement in the centre of gravity of the gun.Execution: Protection from injuries by rounded form without protruding edges and borders of the ergonomicallyshaped plastic part. Flexible installation options according to the corresponding requirements ofthe work station. Variety of possible installation positions; direct installation or installation by means of theincluded angles.Advantages: Increase of industrial safety, the flexible installation prevents trip hazards by compressed airhoses which are scattered around.Scope of delivery: holder, 2 installation angles 45/90° and screw driver set75156 Ident. No. 010Unit price E O.R.h Suitable for blow-off guns 75175 060 to 75177 130. Prod. Gr. 758Continued next pageBlow-off nozzlesfor compressed airApplication: for cleaning work pieces, machine parts etc.Execution: Aluminium, anodised white, air vent can be roughly adjusted via the activating lever, valve head made of special, oil proof rubber, the blow nozzlecan be removed. Air connection G 1 /4".No. 75175 060-200 Standard versionNo. 75175 210 Straight blow-off gunNo. 75176 Model with air jacket nozzle. Eye protection with 8 nozzle holes on the sideNo. 75177 Version with safety nozzle, with additional noise reduction of around 25 dB (A), i.e. well below the permitted limit.The blow-out nozzles printed in bold face are recommended.No. 75175 060-200Illustration with normal nozzleNo. 75175 210Illustration straight versionNo. 75176Illustration with air jacket nozzleNo. 75177Illustration with safety nozzleVersion Hose nozzle Plug in nippleFor internal hose Ø mm 6 9 13 – –Ø Blast nozzle mm 1,5 1,5 1,5 1,5 2,0Can be extended up to mm 5 5 5 5 5Connector thread of the nozzles M 12 x 1,25 M 12 x 1,25 M 12 x 1,25 M 12 x 1,25 M 12 x 1,25Ident. No. 060 090 130 200 21075175 Unit price E O.R. O.R. O.R. O.R. O.R.75176 Unit price E O.R. O.R. – – –75177 Unit price E O.R. O.R. O.R. – –Prod. Gr. 790Electric toolsContinued next pageNozzlesfor a air blow-out nozzlesConnector thread M 12 x 1.25.75177 Protective nozzle, individual, for No. 75176Ident. No. 135produces air jacketUnit price E O.R.75177 Sound muffler nozzle individual for No. 75177with sintered insertIdent. No. 140Unit price E O.R.75177 Safety nozzle, low noise, fulfils OSHA specifications, Ident. No. 145BG- standards B3 'noise' EU machine guidelinesUnit price E O.R.75177 Standard nozzle, individual, for No. 75175 Ident. No. 200Unit price E O.R.ShapeArched Arched Arched Straight StraightLength mm 100 150 125 100 15075178 Extension nozzle, individual for No. 75174-75177 Ident. No. 010 015 – 110 115Unit price E O.R. O.R. – O.R. O.R.75178 Safety extension, quiet Ident. No. – – 020 – –Unit price E – – O.R. – –Prod. Gr. 790No. 75177 135No. 75177 140No. 75177 145No. 75177 200No. 75178 010-015No. 75178 020No. 75178 110-1151268 2010/11