Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

BHandling technologyAccessories for lifting and securing loadsContinued next pageBox grippers for KLT containersIdent. No. 010-030 Box gripper without tilting device, with manual locking.Through easy actuation of switch lever OPEN/CLOSE, the KLT container is locked by using 8 claws. Unlocking through re-actuation of the leverin opposite direction.Ident. No. 110- 130 Box gripper without tilting device, with automatic locking.When lowering the gripper, the KLT container is automatically locked. When setting off, it is automatically opened.Ident. No. 050-060 Box gripper with tilting device, and with manual locking.Optimally suited for the easy emptying of KLT boxes. Simple to use: The gripper is guided from the front side via the slot on the box. The clickand pawl arrangement at the end of the guide rails automatically locks at the front of the box. For the tilting process (120°) loosen the stop bolt,gently tilt the hand lever with the box, which enables a measured emptying. Once the box is emptied, swivel it back until the stop bolt once againengages, open the catch and pawl arrangement and withdraw the gripper.Colour: RAL 2000, yellow orange.Ident. No. 110 Ident. No. 060Tilting over short sideIdent. No. 050Tilting over long sideBox grippers– version adjustable, without tilting device fixed, without tilting device fixed, with tilting deviceFor KLT containers, type64 = 600x400 mm43 = 400x300 mm64 = 600x400 mm 43=400x300 mm 64 = 600x400 mm 43=400x300 mmTilting over – – – Long side Small faceCarrying capacity Kg 125 125 125 60 60Weight Kg 10 9 9 33 2777181 Manual locking Ident. No. 010d 020d 030d 050d 060dUnit price E (O.R.) (O.R.) (O.R.) (O.R.) (O.R.)77181 Automatic locking Ident. No. 110d 120d 130d – –Unit price E (O.R.) (O.R.) (O.R.) – –d = Delivered ex works, postage and packaging excluded.See for yourself the advantages of these box grippers with relation to the optimal handling. For testing purposes, ask for your sample gripper.h Additional information, advice and quotations available on request.t Technical Hotline +49 (0)711 9813-360Prod. Gr. 775Continued next pageFork lift hooksApplication: as add-on unit for all types of stackerExecution: the rotating and pivoting compact hooks are attached outside the dovetail opening. Thereby, the dovetail opening can be fully utilised and there isno jamming of the stacker dovetail on inclined pulling. Your fork lift can effortlessly be transformed into a safe hoist.Ident. No. 020-032 Single, can be locked to a fork.Ident. No. 120- 132 double, can be locked on both fork arms via cross arms, load can be divided into 2 fork arms.ADCBCAElectric toolsFork lift hooks, singleIdent. No. 020-032Fork lift hooks, double,Ident. No. 120-132Model GSE 2,0 GSE 3,2 GSD 2,0 GSD 3,2Carrying capacity Kg 2000 3150 2000 3150Dimension A mm 127 145 127 145Dimension b mm 65 65 65 65Dimensions C mm 215 250 135 160Dimension D mm – – 100 100Weight Kg 5 7,5 11,5 1777185 Ident. No. 020 032 120 132Unit price E O.R. O.R. (O.R.) (O.R.)h Lifting carriages and forklifts see No. 50262 from page 828. Prod. Gr. 7751336 2010/11