Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Workshop accessoriesElectric testing devicesContinued next pageMultimeters (digital current clamp multimeter) DIN EN 61010-1Approval according to standard DIN EN 61010-1. Professional applications can even be carried out innarrow spaces. 3 1 /2-digit LCD display with battery undervoltage display, continuity test, measured valuememory (HOLD).Scope of delivery: measuring lines, battery/batteries, bagIdent. No. 300 BENNING CM 1-1 handy measuring device with max. value memory (MAX).Ident. No. 310 BENNING CM 1-2 as described aboveIdent. No. 320 BENNING CM 1-3 handy measuring device with fork-shaped power pliers head.VoltSensor function: Sensor for a contact-less detection of the phase voltage(optical/acoustic), localized interruptions, e. g. in bare lines, cable drums.Current clamp CM 1-1 CM 1-2 CM 1-3Scope of display 2000 2000 2000Basic precision ± 1,0 % ± 1,0 % ± 1,0 %Direct current – 0,1 V - 600 V 0,1 V - 1000 VAlternating voltage – 0,1 V - 600 V 0,1 V - 750 VDirect current – – –Alternating current 0,01 A - 400 A 0,1 A - 400 A 0,1 A - 200 AResistance – 0.1 Ω - 20 MΩ 0.1 Ω - 20 MΩFrequency – – –Clamp opening max. 30 mm 30 mm 16 mmMeasuring category 600 V CAT III 600 V CAT III 600 V CAT IV/1000 V CAT IIDimensions L x W x H mm 180 x 70 x 42 190 x 70 x 38 190 x 60 x 4075024 Ident. No. 300 310 320Unit price E O.R. O.R. O.R.h Spare batteries 2x 1.5 V type AAA (Micro) see No. 56815 011 or 111 page 1155.Prod. Gr. 751Spare battery 9 V type E (Block) see No. 56815 051 or 151 page 1155.BENNING CM 1-1BENNING CM 1-2 BENNING CM 1-3Electric toolsContinued next pageHigh-capacity multimeters (digital current clamp multimeter) DIN EN 61010-1Approval according to standard DIN EN 61010-1. These measuring devices are designed for demandingindustrial applications. 4digit LCD display with automatic range selection, battery undervoltage display,continuity test, measured value memory, min./max. value recording, REL function (CM 2), PEAK function(CM 8).Scope of delivery: incl. measuring lines, battery, bag and wire temperature sensorwith adapter (CM 8).Ident. No. 330 BENNING CM 2 this digital current clamp multimeter unites the advantages of a digitalmultimeter with power pliers.Ident. No. 335 BENNING CM 5-1 Digital current-tong multimeter with AUTOTEST function for automaticselection of the correct measurement function of TRUE RMS voltage/current (AC/DC),resistance, continuity and diode, this means reliable and straightforward operation (incorrectmeasurements because the wrong measuring range has been chosen are ruled out).Short response time from 5 sampled values per second, voltage measurements with lowinput impedance (LoZ) for suppressing capacitive/inductive stray voltages, precision fromtrue effective-value measuring method TRUE RMS, high measuring category CAT IV, continuity/diodecheck, HOLD, ZERO function.Ident. No. 340 BENNING CM 8 capacity current clamp multimeter with illuminated display. Other functionsare capacity factor measurements (cos phi) (-1.00 - 0.00 - 1.00), diode check, currentat make measurement (motors etc.), harmonic distortion (% THD), indication of rotary fielddirection.Current clamp CM 2 CM 5-1 CM 8Scope of display 4000 9999 6000Basic precision ± 0,5 % ± 0,9 % ± 0,7 %Direct current 0,1 mV - 600 V 1.3 V - 750 V 0,01 mV - 1000 VAlternating voltage 0,1 mV - 600 V 0.7 V - 1000 V 0,01 mV - 1000 VDirect current 10 mA - 300 A 0.9 A - 600 A 0,1 A - 600 AAlternating current 10 mA - 300 A 0.9 A - 600 A 0,1 A - 600 AEfficiency – – 1 W - 600 kWResistance 0.1 Ω - 40 MΩ 0.1 Ω - 10 KΩ 0.1 Ω - 20 KΩFrequency – – 0.1 Hz - 4 kHzTemperature – – -50 °C - +1000 °CClamp opening max. 25 mm 35 mm 40 mmMemory function HOLD HOLD HOLDMeasuring procedure RMS TRUE RMS TRUE RMSMeasuring category300 V CAT III/600 V CAT II 600 V CAT IV/1000 V CAT III 600 V CAT III/1000 V CAT IIDimensions L x W x H mm 192 x 66 x 27 215 x 85 x 51 235 x 85 x 5175024 Ident. No. 330 335 340Unit price E O.R. O.R. O.R.h Spare batteries 2x 1.5 V type AAA (Micro) see No. 56815 011 or 111 page 1155.Prod. Gr. 751Spare battery 9 V type E (Block) see No. 56815 051 or 151 page 1155.BENNING CM 2BENNING CM 8BENNING CM 5-11254 2010/11