Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Workshop accessoriesElectric testing devicesContinued next pageMultimeters (digital multimeter) DIN EN 61010-1These digital measuring devices address a clientele active both in the service area and electronics. Theyare approved according to the high requirements of standard DIN EN 61010-1. Important criteria aresafety, a long service life and easy operation. 3 1 /2 figure LCD display (2000 points) with polarity and batteryundervoltage display, measuring ranges with overload protection. Overvoltage category: CAT III 600 V/CAT II 1000 V. Continuity and diode testing.VoltSensor: these multimeters dispose of a sensor for a contact-less detection of the phase voltage(optical/acoustic) and localized interruptions, e. g. in bare lines, cable drums.Scope of delivery: incl. rubber suspension device, measuring lines, battery/batteries, bag and wiretemperature sensor with adapter (MM 1-3).Ident. No. 111 BENNING MM 1-1 Cost-efficient measuring device with measured value memory (HOLD).Ident. No. 121 BENNING MM 1-2 extended measuring device with measured value memory (HOLD),min./max. value memory (MAX/MIN).Ident. No. 131 BENNING MM 1-3 high-performance measuring device with measured value memory(HOLD), min./max. value memory (MAX/MIN).Multimeter MM 1-1 MM 1-2 MM 1-3Scope of display 2000 2000 2000Basic precision ± 0,5 % ± 0,5 % ± 0,5 %DC V 100 μV - 1000 V 100 μV - 1000 V 100 μV - 1000 VAC V 100 μV - 750 V 100 μV - 750 V 100 μV - 750 VDC A – 1 mA - 10 A 1 mA - 10 AAC A – 1 mA - 10 A 1 mA - 10 AResistance 0.1 Ω - 20 MΩ 0.1 Ω - 20 MΩ 0.1 Ω - 20 MΩFrequency – 1 Hz - 20 MHz 1 Hz - 20 MHzCapacity – 1 pF - 2 mF 1 pF - 2 mFTemperature – – -20 °C - 800 °CDimensions L x W x H mm 156 x 74 x 44 156 x 74 x 44 156 x 74 x 4475024 Ident. No. 111 121 131Unit price E O.R. O.R. O.R.h Spare batteries 2x 1.5 V type AAA (Micro) see No. 56815 011 or 111 page 1155.Prod. Gr. 751Spare battery 9 V type E (Block) see No. 56815 051 or 151 page 1155.BENNING MM 1-1 BENNING MM 1-2BENNING MM 1-3Continued next pageHigh-capacity multimeters (digital multimeter) DIN EN 61010-1These measuring devices are designed for demanding industrial and electronic applications. They areapproved according to the high requirements of standard DIN EN 61010-1. Important criteria are safety, along service life and easy operation. 4-digit LCD display with automatic/manual range selection, polarityand battery undervoltage display. Continuity and diode testing.Ident. No. 210 BENNING MM 4 digital multimeter with power pliers add-on unit, measured value memory(HOLD), max. pliers opening 30 mm, incl. measuring tips, alligator clip.Ident. No. 231 BENNING MM 7-1 high-performance powerful measuring device with AutoV function forautomatic AC/DC voltage recognition and low input impedance (LoZ) for suppressingcapacitive/inductive stray voltages, precision from true effective-value measuring methodTRUE RMS, integrated volt sensor signals contactless phase voltages and breakage inwires (optical/acoustic), of the measuring category CAT IV, REL, PEAK, HOLD, MIN/MAXfunctions, illuminated display. Including protective rubber frame, case, battery, measuringcables, wire temperature probe with adapter, magnetic suspension.Ident. No. 240 BENNING MM 10 high-capacity measuring device of max. measuring category CAT IV,measurement, min./max. value storage (MIN/MAX), illuminated display.Multimeter MM 4 MM 7-1 MM 10Scope of display 4200 with bar graph 6000 with bar graph 6000Basic precision ± 0,5 % ± 0,08 % ± 0,5 %Direct current 1 mV - 600 V 0,1 mV - 1000 V 0,1 mV - 1000 VAlternating voltage 1 mV - 600 V 0,01 mV - 1000 V 0,1 mV - 750 VDirect current – 10 μA - 10 A 0.1 μA - 10 AAlternating current 0,1 A - 300 A 10 μA - 10 A 1 mA - 10 AResistance 0.1 Ω - 42 MΩ 0.1 Ω - 40 MΩ 0.1 Ω - 60 MΩFrequency 1 Hz - 30 MHz 0.1 Hz - 100 kHz 1 Hz - 60 MHzCapacity – 1 nF - 10 mF 1 pF - 6 mFTemperature – -40 °C - 400 °C –Interface – – USBSoftware – – PC-Win MM 10Measuring procedure RMS TRUE RMS TRUE RMSMeasuring category300 V CAT III/600 V CAT II 600V CAT IV/1000 V CAT III 600 V CAT IV/1000 V CAT IIIDimensions L x W x H mm 225 x 77 x 35 188 x 94 x 40 164 x 82 x 4475024 Ident. No. 210 231 240Unit price E O.R. O.R. O.R.h Spare batteries 2x 1.5 V type AAA (Micro) see No. 56815 011 or 111 page 1155.Prod. Gr. 751Spare battery 9 V type E (Block) see No. 56815 051 or 151 page 1155.BENNING MM4BENNING MM7-1BENNING MM10Electric Tools2010/111253