Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Workshop accessoriesElectric testing devicesContinued next pageTwo-pole voltage tester DIN EN 61243-3Ident. No. 110 Model: Master Check 3.2 With LED scale for direct and alternating voltage. Voltages from50 V AC and 120 V DC can also be tested without inserted battery. Polarity display,continuity test, one-hand operation, automatic battery monitoring.Ident. No. 120 Model: Combi Check 1.3Stage voltage tester to indicate direct and alternating voltagesof 6-690 Volt. During the continuity test, power resistances < 500 kΩ are also acousticallydisplayed. Phase test and test peak illumination. Remaining functions as inMaster Check 3.2.Delivery: with 2 batteries 1.5 V type AAA (Micro)Model Master Check 3.2 Combi Check 1.3Dimensions (LxWxH) in mm 230 x 55 x 34 230 x 55 x 34Rated voltage range AC/DC V 6-400 6-690Voltage display LED LED and acoustic signalInput resistance kΩ ≥300 ≥300Peak voltage stability kV 4 6Input current Is < 2.5 mA at 400 V Is < 2.5 mA at 690 VContinuity test kΩ 90 V AC (acoustic signal)Frequency range Hz 0-100; display of AC at f > 2 Hz 0 -100; display of AC at > 2 HzTemperature range -10 °C to +55 °C -10 °C to +55 °CProtection class IP 50Weight g 135 13575027 Ident. No. 110 120Unit price E O.R. O.R.h Spare batteries 2x 1.5 V type AAA (Micro) see No. 56815 011 or 151 page 1155. Prod. Gr. 751Ident. No. 110Ident. No. 120Continued next pageDigital voltage and continuity tester DIN EN 61243-32-pole microprocessor controlled voltage tester with well legible, 4 digit LCD display. Large measuringrange from 5 V to 690 V. Continuity and semi-conductor test. While measuring at positions difficult toreach, the indicator can be frozen with the Hold button.Scope of delivery: with 9 V battery Type E (Block)Model Digi Check 3.2Dimensions (LxWxH) in mm 223 x 55 x 36Rated voltage range AC/DC V 5-690Voltage displaydigital 4-digit and LCDInput resistance kΩ ≥660Continuity test kΩ 0-500 (acoustic signal)Display ranges for voltage V 5-690 (in 0.1 V steps)100 -999 (in 0.1 V steps)Error limits1.5% of display rangeFrequency range Hz 0-2000Rated battery voltage 9Battery capacity3000 actuationsTemperature range -10 °C to +50 °CProtection class IP 50Weight g 12075027 Ident. No. 311Unit price E O.R.h Spare battery 9 V type E (Block) see No. 56815 051 or 151 page 1155. Prod. Gr. 751One-handed operationContinued next pageAutomobile voltage testerAutomobile voltage tester with cable test.Its low current consumption of 1.5 mA makes the Car Check an ideal choice for troubleshooting of electroniccomponents. Conventional test lamps would often damage such components. Therefore the CarCheck is equipped with a needle probe with sliding mechanism, which eliminates the need for stripping theconductor for testing.Measuring 139 cm, the tester cable length is dimensioned extra generously.ModelCar CheckDimensions (LxWxH) in mm 137 x 21 x 18Rated voltage range AC/DC V 3-48Polarity ±yesWeight g 5775027 Ident. No. 410Unit price E O.R.Prod. Gr. 751Electric Tools2010/111255