Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Electric and cordless toolsSabre sawsContinued next pageCompass saw bladesfor the following makes BOSCH, Makita, Metabo, AEG, DeWALT, FESTOOL, FLEX, HOLZ-HER, MilwaukeeExecution: HSS = fully hardened high capacity quick cut steelApplication: for use in metal, aluminium and non-ferrous metal.Box qty.: 5 piecesBosch no. Type Toothedlength/Version Suitable for 71132tooth spacingmmIdent. No. Pr./pack E2 608 631 012 T 118 G 67/ 0,7 Crossed, Thin sheet Metal (0.5 - 1.5 mm) 205 O.R.milled2 608 631 013 T 118 A 67/ 1,1-1,5 Crossed,milledThin sheet Metal (1 - 3 mm) 215 O.R.2 608 631 032 T 218 A 67/ 1,1-1,5 Crossed,milled2 608 631 319 T 318 A 106/ 1,2 Crossed,milled2 608 631 014 T 118 B 67/ 1,9-2,3 Crossed,milledThin sheets (1- 3 mm), specially designed forcurved cuts225 O.R.Thin sheet metal (1- 3 mm),pipes + profiles,incl. aluminium (Ø < 65 mm)235 O.R.Thin sheet Metal (2.5 - 6 mm) 247 O.R.2 608 631 404 T 318 B 106/ 2 Crossed,milled2 608 638 473 T 123 X 74/ 1,2-2,6 Crossed,milled2 608 631 017 T 127 D 74/ 3 Crossed,milled2 608 631 010 T 101 A 74/ 2 Clearanceangle andteeth groundThin sheet metal (2.5- 6 mm),pipes + profiles,incl. aluminium (Ø < 65 mm)cuts of high angular accuracyThin sheet metal (1.5- 10 mm),pipes + profiles,incl. aluminium (Ø < 30 mm)Thin sheet metal (3- 15 mm),pipes + profiles (Ø < 30 mm)Plexiglas, polycarbonate(2 - 20 mm)255 O.R.265 O.R.275 O.R.295 O.R.Prod. Gr. 733Continued next pageCompass saw bladesfor the following makes BOSCH, Makita, Metabo, AEG, DeWALT, FESTOOL, FLEX, HOLZ-HER, MilwaukeeExecution: bi-metal = highly flexible, unbreakable compound made from HCS and HSS for extreme loads, highly flexible, long life.Application: can be used for wood, metal, non-ferrous metal and aluminium.Box qty.: 5 piecesBosch no. Type Toothedlength/tooth spacingmm2 608 634 567 T 144 DF 74/ 4-5,2 Crossed,ground2 608 634 243 T 344 DF 126/ 4 Crossed,ground2 608 634 233 T 101 AOF 57/ 1,4 Pointed toothed,ground2 608 634 897 T 101 AIF 77/ 1,7 Pointed toothed,ground2 608 634 234 T 101 BF 74/ 2,7 Clearance angle andteeth ground2 608 634 235 T 101 BRF 74/ 2,5 Clearance angle andteeth ground2 608 636 229 T 301 CDF 91/ 3 Crossed,groundVersion Suitable for 71132Hard and soft wood (5 - 65 mm),all board types, also coatedThick hard and soft wood (5 - 65 mm),all board types, also coatedHard wood, laminates (1.5 - 15 mm),coated boards/HPL, plywood,specially designed for curved cuts, no breakingaway of materialHard wood, laminates,coated boards/HPL (2 - 30 mm),synthetics/epoxy (Ø < 30 mm),no breaking away of materialHard wood, laminates,coated boards/HPL (3 - 30 mm),synthetics/epoxy (Ø < 30 mm)Laminates, coated boards (3 - 30 mm),kitchen work tops (3 - 45 mm),clean surfaceHard and soft wood (4 - 65 mm),coated boards/HPLIdent. No. Pr./pack E305 O.R.315 O.R.325 O.R.335 O.R.345 O.R.355 O.R.365 O.R.2 608 634 505 T 118 AF 67/ 1,1-1,5 Crossed,milled2 608 634 241 T 318 AF 106/ 1,1 Crossed,milled2 608 634 237 T 118 EOF 57/ 1,5 Crossed,milled2 608 634 503 T 118 BF 67/ 1,9-2,3 Crossed,milled2 608 634 242 T 318 BF 106/ 1,8 Crossed,milled2 608 634 994 T 345 XF 106/ 2,4-5 Crossed,milledThin sheet Metal (1 - 3 mm) 405 O.R.Thin sheet metal (1 - 3 mm),sandwich materials (< 65 mm),pipes + profiles,incl. alu/epoxy (Ø < 65 mm)Thin sheets (1.5- 4 mm), specially designed forcurved cuts415 O.R.425 O.R.Thin sheet Metal (2.5 - 6 mm) 435 O.R.Thin sheet metal (2.5 - 6 mm),sandwich materials (< 65 mm),pipes + profiles,incl. alu/epoxy (Ø < 65 mm)Timber with nails (< 65 mm),wooden materials, plastics,sheet metal, pipes/sections,including aluminium (Ø 3 - 10 mm)445 O.R.485 O.R.Prod. Gr. 733Electric Tools2010/111239