Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Electric and cordless toolsDouble-ended grindersContinued next pageDouble-ended grindersVoltage 230 V, 50 Hz or 3 phase motor 400 V, 50 HzAll machines with low noise, maintenance free induction motor, both sides equipped with ball bearing shaftand eye protection against flying sparks. With extractor connection.Ident. No. 020-120 with emergency stop buttonIdent. No. 410 stand (without extraction), height 880 mm, weight 19 kgDelivery: with grinding wheel, fine (grain size 60) and grinding wheel, coarse (grain size 36).3 years METABO warrantyRegistration:www.metabo.com/xxlIdent. No. 110 Ident. No. 130Supply voltage Alternating current 230 V, 50 Hz Three phase current 400 V, 50 HzModel DS W 5175 DS W 9200 DS D 6175 DS D 9201 DS D 9250Speed at no load rpm 2840 3000 2840 3000 1500Power input/output W 500/370 500/370 550/420 550/420 900/620Grinding wheel Ø x width mm 175x25 200x25 175x25 200x25 250x40Grinding wheel bore Ø mm 32 32 32 32 51Weight Kg 15 16 15 16 3370575 Double-ended grinders Ident. No. 020 030 110 120 130dUnit price E O.R. O.R. O.R. O.R. O.R.70575 Grinding wheel grain 36 Ident. No. 173 203 173 203 253Unit price E O.R. O.R. O.R. O.R. O.R.70575 Grinding wheel grain 60 Ident. No. 176 206 176 206 256Unit price E O.R. O.R. O.R. O.R. O.R.70575 Stand Ident. No. 410dUnit price E O.R.d = Delivered ex works, postage and packaging excluded. Prod. Gr. 745Ident. No. 410Continued next pageDouble-ended grindersVoltage 230 V, 50 Hz or 3 phase motor 400 V, 50 HzIdent. No. 010, 020, 050 and 060 for dry grinding.Delivery: with 2 standard corundum grinding wheels, 1 piece each for pre and finishedcut, no support, grinding wheels made of carbide available on request.Ident. No. 030 for wet and dry grinding, for pre-cut and finished cut as well as for sharpening and grindingprocedures.Delivery: with standard corundum sanding disc grain 60 (for 3000 1 /min) and wet sandingdisk (for 120 1 /min running in the water bath).The grinding wheels have a hole with 20 mm Ø, incl. reducing sleeve.Ident. No. 410 stand, weight 26 kg3 years METABO warrantyRegistration:www.metabo.com/xxlIdent. No. 010Ident. No. 030 Ident. No. 060Supply voltage Alternating current 230 V, 50 Hz Three phase current 400 V, 50 HzModel DS 150 W DS 175 W TNS 150 W DS 175 D DS 200/25DSpeed at no load rpm 2950 2950 2750/126 2950 2950Power consumption W 330 450 330 570 740Grinding wheel Ø x width mm 150x20 175x25 150x20 175x25 200x25Grinding wheel bore Ø mm 20 20 20 20 20Spindle Ø mm 17 17 17 17 17Weight Kg 7,5 12,5 8 12,5 1670581 Belt sanding machines Ident. No. 010 020 030 050 060Unit price E O.R. O.R. O.R. O.R. O.R.70581 Grinding wheel grain 36 Ident. No. 153 173 153 173 203Unit price E O.R. O.R. O.R. O.R. O.R.70581 Grinding wheel grain 60 Ident. No. 156 176 156 176 206Unit price E O.R. O.R. O.R. O.R. O.R.70581 Wet sanding disc Ident. No. – – 250 – –Unit price E – – (O.R.) – –70581 Stand Ident. No. 410dUnit price E O.R.d = Delivered ex works, postage and packaging excluded. Prod. Gr. 745Ident. No. 410Electric Tools2010/111217