Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Handling technologyElectric chain block and cranesContinued next pageDEMAG Manulift DCMS-Pro and electric chain hoists DCS-Prowith infinitely variable speed regulationstationary with lug suspensionOperating voltage380-480 V, 50-60 Hz three-phase current (by frequency converter). Infinitely variablespeed control allows careful approach and positioning of sensitive products and high quality parts,smooth, safe lifting, lowering and positioning of e. g. fluid containers or fragile products.Colour: RAL 5009, azure blue.The DCMS-Pro/DCS-Pro offers decisive advantages:•adjustable speed regulation for variable raising and lowering motions for each load•automatic load-dependent increased maximum speed by up to 90 % on partial load operation and no-load•low noise level by executing the frequency converter in 16-kcps technology•Shut down of the lifting and lowering movement in the final position.•largest possible operating safety through speed feedback and overload control using two-processorsystemIdent. No. 175/185/195 Ident. No. 180/190/200Carrying capacity Kg 80 125 250 500Model DCMS-Pro 1-80VS30-30DCS-Pro 1-125VS30-30DCMS-Pro 1-125VS30-30DCS-Pro 2-250VS16-30DCMS-Pro 2-250VS16-30DCS-Pro 5-500VS8-15Hook distance* M 2,8 5 2,8 5 2,8 5stroke speed V min - V nominal m/min 0,15-30 0,15-30 0,15-30 0,15-16 0,15-16 0,08-8Lifting speed Vmax in the partial load range m/min 30 30 30 30 30 15Construction height mm 694 364 694 364 694 416Length mm 502 502 502 502 502 548Weight Kg 25 25 25 25 25 29FEM group 4m 4m 4m 2m+ 2m+ 2m+77080 Ident. No. 175 180 185 190 195 200Unit price E (O.R.) (O.R.) (O.R.) (O.R.) (O.R.) (O.R.)Operating time 60 % (40/20) ED.Prod. Gr. 774* Optional hook distance 8 m with model DCS-Pro or 4.3 m with DCMS-Pro on request.Continued next pageDEMAG Electric chain hoists DCRS-ProOperating voltage 380-480 V, 50-60 HzThe infinitely variable chain hoist is not available with rocking lever grip - very suitable for fast and simultaneous sensitive andparticularly frequent transfer of load up to 250 kg. The DCRS-Pro is therefore a good alternative to the DEMAG Manulift.Your advantages by using the new DCRS:•infinitely variable speed for lifting and lowering movement over the complete load range•soft, precise positioning by particularly fine-sensing control•Load take-up, controlling and guiding with one hand only•with integrated C-hook or with well proven quick-acting coupling for installation of other load carrying attachment (see alsoaccessories for DEMAG Manulist DCM-Pro page 1322)•Installation of the rocker handle in special load suspension devices in an ergonomic favourable place is possibleCarrying capacity Kg 80 125 200 250Model DCRS-Pro 1-80 VS 30-30 1-125 VS 30-30 2-200 VS 30-16 2-250 VS 30-16Hook distance * M 2,8 2,8 2,8 2,8stroke speed V min - V nominal m/min 0,15-30 0,15-30 0,15-16 0,15-16Lifting speed V max in the partial load range m/min 30 30 30 30Construction height mm 754 754 754 754Length mm 502 502 502 502Weight Kg 25 25 25 25FEM group 4m 4m 3m 2m+77100 Ident. No. 202 204 206 208Unit price E (O.R.) (O.R.) (O.R.) (O.R.)* Optionally hook displacement 4.3 m on request. Prod. Gr. 774Continued next pageWe offer a wide range of lifting devices, load suspension devices, lifting accessoriesincluding load reversing crossbeams:Electric ToolsBarrel gripperNo. 77180 010from page 1335Loop lifting slingsNo. 77188 010from page 1337and round slingsNo. 77200 710from page 1338Sling chainsNo. 77208 010from page 1341Lifting accessoriesNo. 77235 010from page 1342 page 1335Load reversing crossbeamNo. 77421 110from page 13412010/111323