Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Electric and cordless toolsCompass sawsContinued next pageSabre saw bladesfor the following makes: BOSCH, AEG, FEIN, METABO (for FLEX all models except SR 602).Execution: bi-metal = highly flexible, unbreakable compound made from HCS and HSS.Application: for use in metal, non-ferrous metal and aluminium. For further uses, please refer to chart.Box qty.: 5 piecesAccording toBOSCH typeTotal length/Tooth spacingVersion Suitable for 71134mm Ident. No. Pr./pack EThin sheet metal (3 - 8 mm)010 O.R.massive pipes/profiles (Ø 10-100 mm),quick cutS 922 BF 150/ 1,8 Crossed,milledS 922 EF 150/ 1,4 crossedmilledS 922 AF 150/ 1,0 Crossed,milledS 1122 BF 200/ 1,8 Crossed,milledS 1122 EF 200/ 1,4 crossedmilledS 1022 VF 200/ 1,8-2,4 CrossedmilledS 1211 H 300/ 2,5 CrossedmilledS 1211 VF 300/ 1,8-2,4 CrossedmilledThin sheet metal (1.5- 4 mm),pipes/profiles (Ø 5-100 mm)Thin sheet metal (0.7 - 3 mm)fine pipes/profiles (Ø 5-10 mm),easy, fine cutThin sheet metal (3 - 8 mm)massive pipes/profiles (Ø 10-175 mm),flexible flush cut,quick cutThin sheet metal (1.5- 4 mm),pipes/profiles (Ø 5-175 mm),flexible flush cutSteel 37, non-ferrous heavy metal,stainless steel, steel pipes,V2A, cast iron 3-8 mmSteel St 37, sections, non-ferrous heavy metal,cast and steel pipes,insulating materials 3-10 mmSteel St 37, non-ferrous heavy metal,cast and steel pipes up to 3-8 mm,pallet construction020 O.R.030 O.R.040 O.R.050 O.R.060 O.R.070 O.R.080 O.R.Prod. Gr. 793Continued next pageSabre saw bladesfor the following makes: BOSCH, AEG, FEIN, METABO (for FLEX all models except SR 602 VV).Execution: bi-metal = highly flexible, unbreakable compound made from HCS and HSS.Application: for use in metal, non-ferrous metal and aluminium. For further uses, please refer to chart.Box qty.: 5 piecesBosch no. Type Total length/Tooth spacingVersion Suitable for 71135mmIdent. No. Pr./pack E2 608 656 015 S 922 EF 150/ 1,4 Crossed,milledThin sheet metal (1.5 - 4 mm),pipes/profiles (Ø 5 - 100 mm)015 O.R.Electric tools2 608 656 014 S 922 BF 150/ 1,8 Crossed,milled2 608 656 019 S 1122 BF 225/ 1,8 Crossed,milled2 608 656 021 S 1122 HF 225/ 2,5 Crossed,milled2 608 656 022 S 1222 VF 300/ 1,8-2,6 Crossed,milled2 608 654 763 S 1411 DF 300/ 4,3 Crossed,milled2 608 650 673 S 644 D 150/ 4,3 Crossed,ground2 608 650 676 S 1531 L 240/ 5,0 Crossed,ground2 608 650 682 S 1542 K 240/ 8,5 Crossed,groundThin sheet metal (3 - 8 mm)massive pipes/profiles (Ø 10- 100 mm),quick cutThin sheet metal (3 - 8 mm)massive pipes/profiles (Ø 10 - 175 mm),flexible flush cut,quick cutPallet repair, wood with nails/metal (5 - 175 mm),metal sheets, pipes, alu profiles (3 - 12 mm),flexible flush cutWood with nails/metal (5 - 250 mm),metal sheets, aluminium profiles (3 - 10 mm),plastic profiles (Ø 3 - 250 mm),flexible flush cutWood with nails/metal,chipboards (10 - 250 mm),gas concrete (10 - 250 mm),synthetics/ GFP, profiles (5 - 60 mm)Construction timber (6 - 100 mm),wooden partitions (< 75 mm),boards: chips, MDF (6 - 60 mm), plywood,plastic (6 - 100 mm), specially designed for plunge cutsCoarse wood, without nails (15 - 190 mm),debranching of living wood (Ø < 190 mm),firewood (Ø 15 - 190 mm)Coarse wood, without nails (15 - 190 mm),debranching of living wood (Ø < 190 mm),firewood (Ø 15 - 190 mm)055 O.R.065 O.R.115 O.R.155 O.R.235 O.R.505 O.R.515 O.R.525 O.R.Prod. Gr. 7331242 2010/11