Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Electric and cordless toolsCore drilling unitsContinued next pageMagnetic cutting and drilling unit ROTOBUXVoltage 230 V, 50 Hz, q shock proof, noise suppressed.Can be used in any position, vertical, horizontal and also overheads. lightweight, easy operation. For safe and fast production ofholes up to Ø 50 mm and 50 mm drilling depth with cutting tools with 19 mm Weldon shaft without any pre- or post-processing.Modest material cutting of cutting tools which work crown shaped only on the periphery, thus with heavy duty and cutting edge lifeadvantages. Centring pin in the tool for sound spot drilling, coolant feed through centring pin (can be obtained as an attachment).A drill chuck for twist drills 1.5-13 mm diameter can be used.Model BRP 50Core bits Ø mm 13-50Drilling depth mm 50Twist drills mm 1-23Travel mm 145Magnetic base mm 180 x 90Power input of the motor W 1150Nominal speed rpm 310/580Magnet holding force kN 12Ident. No. 098-451Total dimensions (H x L x B) mm 510 x 300 x 185Morse taper MT 2Weight Kg 1670141 ROTOBUX unit Ident. No. 030dUnit price E O.R.70141 Drill chuck 1.5-13 mm Ident. No. 064Unit price E O.R.d = Delivered ex works, postage and packaging excluded. Prod. Gr. 712Continued next pageMagnet-core drilling machinesVoltage 230 V, 50 Hz, q shock proof, noise suppressed.Valid for both models:•Extra high magnet holding force•Large movement range•Powerful and long-lasting Metabo Marathon motor•Robust and exact dovetail guide•Integrated coolant tank•Automated supply of coolant to the drill tipIdent. No. 010 19 mm Weldon direct attachmentIdent. No. 020 METABO VTC full-shaft control electronics, thermal overload protection, 2-stage oil-bathtransmission, clockwise/anti-clockwise rotation for tapping, adapter: morse taper MT 2-19 mm Weldon shankIdent. No. 100 Adapter: From Weldon to Fein Quick In - for Ident. No. 010 and 020.Scope of delivery:Ident. No. 010 ejector pin (6.35 x 77mm), safety chain, hexagon socket key size 4, transport boxIdent. No. 020 Industrial adapter MT 2 with 19 mm Weldon shank, ejector pins (6.35 x 77 mm and 6.35x 102 mm), morse taper ejecting drift MT 2, safety chain, hexagon socket key size 5, transportboxModel MAG 32 MAG 50Power consumption W 1000 12000Speed at no load 1/min 0-450 150-250/ 150-450Travel mm 150 160Max. boring depth mm 50 50Max. drillingØ for core drills mm 12- 32 12- 50Twist drills mm 16 20Thread cutting – M8-M16Weight Kg 11 1370142 Ident. No. 010 020Unit price E O.R. O.R.70142 Ident. No. 100Unit price E O.R.h Suitable cutting tools see from No. 70141 098 to 451.The use of cutting tools from FEIN is also possible (No. 70146 120 to 70147 810) in combinationwith the adapter (Ident. No. 100).Prod. Gr. 745Ident. No. 010Ident. No. 020Electric toolsContinued next pageCutting tools HSS Co 5 with 19mm Weldon shankØ mm 13 14 16 17 18 19 20 22 24 26 30 32 42 5070141 Useful length 30 mm Ident. No. 098 100 112 115 118 121 127 136 – 157 175 187 – –Unit price E O.R. O.R. O.R. O.R. O.R. O.R. O.R. O.R. – O.R. O.R. O.R. – –70141 Useful length 50 mm Ident. No. 298 300 312 315 – – 327 336 348 357 375 – 426 451Unit price E O.R. O.R. O.R. O.R. – – O.R. O.R. O.R. O.R. O.R. – O.R. O.R.h Other cutting tools and accessories on request. Prod. Gr. 712Continued next pageCentring pin for cutting toolsAlso for ejection of the cut out material.70141 Useful length 30 mm Ident. No. 610Unit price E O.R.70141 Useful length 50 mm Ident. No. 620Unit price E O.R.Prod. Gr. 7121200 2010/11