Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Handling technologyWorkshop crane and lifting hoistsContinued next pageRatchet hook tacklesExecution: with free wheel change for fast passage of the non-loaded chain, suitable for heavy duty industrialuse, for lifting, pulling and tensioning. Automatically acting, fully encapsulated load pressure brake.The brakes are not sensitive to vibrations, making it suitable for use as a lashing device on lorries.Load chain galvanised in accordance with DIN EN 818-7.VersionWith round steel chainCarrying capacity Kg 800 1600 3200Number of chain stands 1 1 1Travel M 1,5 1,5 1,5Hoisting power at rated load daN 29 36 37Smallest hook distance mm 280 335 395Length of the hand lever mm 245 265 415Weight at standard hoist Kg 5,7 8,0 15,077158 Ident. No. 080 160 320Unit price E O.R. O.R. O.R.h Other load chains and bigger carrying capacities available on request. Prod. Gr. 775Continued next pageAluminium cylinder gear block and tacklesExecution: high lifting speed, high corrosion resistance due to the nearly closed aluminium housing, ballbearingprecision gears, threaded automatic mechanical brake, galvanised load chain in accordance withDIN EN 818-7 (quality class T) and galvanised hand chain in accordance with DIN 766, 360° rotating safetyhook.Carrying capacity Kg 250 500 1000 2000Load strands Number 1 1 1 2Travel M 3 3 3 3Smallest distance between the hooks mm 322 322 365 506Weight Kg 8,9 8,9 12,2 13,677165 Ident. No. 062 064 066 068Unit price E (O.R.) (O.R.) (O.R.) (O.R.)h Longer chains for bigger operating heights and higher carrying capacities available on request. Prod. Gr. 775Continued next pageSpur gear pulley with 360° rotating hand chain guideExecution: the 360° rotating hand chain guide guarantees operation from all directions:•Side work outside the danger zone•Horizontal drawing and clamping•Operation also possible from aboveThe robust steel casing (powder-coated) is suitable for the hardest instances of use and as it closes firmly,is protected from dust and damage from outside.Carrying and loading hooks can be rotated (360°), with hook safety.Galvanised hand and load chain conforming to DIN EN 818-7 (quality class T) High operating safety and lowmaintenance due to new brake system.Carrying capacity Kg 500 1000 2000 3000Load strands Number 1 1 1 1Travel M 3 3 3 3Lifting power at rated load daN 21 30 32 38Smallest distance between the hooks mm 300 335 395 520Weight Kg 9 13 20 2977165 Ident. No. 410 420 430 440Unit price E O.R. O.R. (O.R.) (O.R.)h Longer chains for bigger operating heights and higher carrying capacities available on request. Prod. Gr. 775Continued next pageCylinder gear block and tacklesExecution:•Robust housing completely made of steel•High quality enclosed bearing•360° rotating hooks•galvanised load chain and hand chain DIN EN 818-7 (quality class T)Advantage:•Through stay bolts between the end plates guarantee increased stability•Brake system protected from dust and penetration•extremely service friendly deviceCan be delivered optionally with sliding clutch and chain storer.All details refer to 3 m hook distance and operating height. Load and manual chain also available in shorter or longer versions.Model 0,5 1 2 3Carrying capacity Kg 500 1000 2000 3000No. of the bearing chain strands 1 1 2 2Travel M 3 3 3 3Hoisting power at rated load Kg 26 36 37 41Smallest hook distance mm 320 370 530 620Weight Kg 9,0 11,2 15,3 24,777166 Ident. No. 050 060 070 080Unit price E O.R. O.R. O.R. O.R.h Longer chains for bigger operating heights and higher carrying capacities available on request. Prod. Gr. 775Electric Tools2010/111331