Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Workshop accessoriesElectric testing devicesContinued next pageMetal and voltage detector Type MV 9Application: for locating concealed metal parts and live cables in walls, ceilings and floors.Important: Redundant functions can be 'disabled'.Switch position M: the device looks for and detects concealed metal parts. Not only steel but alsonon-ferrous metals (copper, brass, aluminium) and noble metals such as gold and silver.Switch position V: now, only cables carrying current are indicated. The pre-selectable function has theadvantage that voltage can also be detected at a place where there is metal and vice-a-versa.Higher sensitivity through new IVF searching technology: Locates water pipes up to about 50 mm and3 x 1.5 mm copper pipes up to 30 mm. For exact localisation of non-visible objects, penetration depthcan be decreased step by step (the scattering is reduced).Scope of delivery: with 9 V battery Type E (Block)75016 Metal and voltage detector Ident. No. 120Unit price E O.R.h Spare battery 9 V type E (Block) see No. 56815 051 or 151 page 1155. Prod. Gr. 751Continued next pageVoltage tester DIN EN 61243-3Application: for direct and alternating voltages.Execution: with polarity and phase display, housing made of impact resistant, unbreakable material. Tested and approved according to tensionclass B, IEC/EN 61243-3, VDE 0682401, part 401, overvoltage category: CAT IV-500 V.Ident. No. 026 DUSPOL digital LC: Illuminated 3 digit LCD display and 8 LED display for direct and alternating voltages, adjustable voltage indicator:6 -690 VAC/750 VDC, additional vibration alarm for voltage detection, acoustic/optical passage test, phase sequence/phase test: LCD,Polarity test: LCD, Load connection with push button: IS ≤ 200 mA, with precise illumination of dark testing points, type of protection IP 64(dust-proof/spray-water protected), incl. 2 batteries 1.5 V type AAA (Micro).Ident. No. 031 DUSPOL expert: Direct and alternating voltage indicator up to 690 VAC/750 VDC (LED), indicator stages: 12, 24, 50, 120, 230, 400, 690 V,additional vibration alarm for voltage detection, acoustic/optical passage test, phase sequence/phase test: LCD, polarity check: LED, load connectionwith push button: IS ≤ 200 mA, with measuring point illumination, degree of protection: IP 64 (dust-proof/spray-water protected),including 2 x 1.5 V Micro batteries (LR03/ AAA)Ident. No. 036 DUSPOL analogue plus: Direct and alternating voltage indicator up to 690 VAC/750 VDC LED/plunger, indicator stages: 12, 24, 50, 120, 230,400, 500, 690 V, phase sequence/phase test: LCD, Polarity test: LED, connecting the plunger level indicator with push button: IS ≤ 250 mA(for 750 VDC), protection type: IP 64 (dust-proof/splash protection).Ident. No. 055 PROFIPOL: The extra low voltage display starting at 6 V is particularly interesting in this device. 6-400 V display via LEDs, fully insulatedprotective housing. Dust and water-proof (IP 65), thus also permitted for outdoors.Ident. No. 110 Quick access case for above models.Ident. No. 026 Ident. No. 031 Ident. No. 036 Ident. No. 055Designation 75017Ident. No.U. pr. EDUSPOL digital LC 026 O.R.DUSPOL expert 031 O.R.DUSPOL analogue plus 036 O.R.PROFIPOL 055 O.R.Quick access case made from artificial leather 110 O.R.h Spare batteries 2x 1.5 V type AAA (Micro) see No. 56815 011 or 111 page 1155. Prod. Gr. 751Continued next pageContinuity and line tester DUTESTApplication: for high and low impedance resistance measuring.Execution: optical display via 2 contrasting LEDs and acoustic via buzzer, with torch function.•Low impedance precision resistors are displayed from 0-900 Ω and high impedance from 0-90 kΩ.•The polarity is registered by semiconductor components such as diodes, transistors etc.•The appliance is protected from external voltage up to 400 V.•The casing is impact resistant and indestructible and corresponds to IP 30•VDE/GS tested and authorizedDelivery: without batteries – required are 3x 1.5 V type AA (Mignon)75021 Continuity and line tester Ident. No. 010Unit price E O.R.h Spare batteries 3x 1.5 V type AA (Mignon) see No. 56815 021 or 121 page 1155. Prod. Gr. 751Electric Tools2010/111251