Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

22G1/4Workshop accessoriesCompressed-air devicesContinued next pageBlow-out nozzleLow noise level and compressed air controller via locking screw and low noise multi-channelnozzle, 65 mmSuitable for specific and precise blowing out of workpieces and injection moulded parts. Nozzle made ofsteel, therefore nozzle tip does not burst. Noise level at 6 bar = 79 dB(A).Max. air pressure bar 10Connector thread for air supply G 1 /4"For internal hose Ø mm 675179 Blow-out nozzle Ident. No. 200Unit price E O.R.75179 Nozzle Ident. No. 260Unit price E O.R.Prod. Gr. 753Continued next pageMulti-duct nozzlewith compressed air supply controllerFor cooling by air or emulsion during metal removalLength of nozzle mm 105Connector thread for air supply G 1 /4"75179 Ident. No. 600Unit price E O.R.Prod. Gr. 75315105459Continued next pageTyre inflatorfor the EU design permit, for the work shop and petrol station, optimal handlingFilling, discharging of pressure and testing with one movement. Manometer with plastic protective flapagainst the effects of impact and blows. Safety device against over pressure, can be loaded up to the finalvalue of the display area. Scale divided into bar and psi. With plug in nipple.Ident. No. 030 with automatic valve lever connector, manometer Ø 80 mm.Ident. No. 040 with double-side petrol station plug, manometer Ø 80 mm.Measuring range bar 0-10Measuring range psi 0-140 0-14075180 Ident. No. 030 040Unit price E O.R. O.R.h Ident. No. 030 and 040 non-calibrated execution. Calibrated execution on request Prod. Gr. 753Continued next pageSpray gunwith pivoting nozzleFor spraying thin fluids, e.g. oils. With a translucent plastic canister, spray is adjusted at the nozzle.Width of nozzle mm 2Operating pressure bar 2-6Air consumption at 6 bar l/min 123Contents of the container approx. l 0,7Nozzle for internal hose Ø mm 675201 Ident. No. 010Unit price E O.R.75201 Spare container with lid Ident. No. 100Unit price E O.R.Prod. Gr. 790Continued next pageSafety washing gunswith nozzle and with lever and control wheelArea of application processing stations for washing out of parts, cleaning of machines among others.For spraying of water and drilling liquid.•Hose connector for 1/2" hoseConnection G 1/2Nozzle Ø mm 2Max. Pressure bar 40Nozzle for internal hose Ø mm 12,575202 Spray gun Ident. No. 010Unit price E O.R.Nozzle Ø mm 2 475202 Spare nozzle Ident. No. 100 110Unit price E O.R. O.R.Prod. Gr. 753Electric Tools2010/111271