Electro-tools and machines Chapter overview ... - EN / Hahn+Kolb

Deburring machineDeburring toolsContinued next pageCompressed air chamfering pencilApplication: for chamfering outside contours with grinding pins.Execution: ON/OFF turning valve. Hose with single-handed coupling connection. Air outlet at the back.The eccentric housing is equipped with 3 openings on the perimeter. Twisting the housing adjusts theburr width. Required operating pressure 6 bar.Scope of delivery: includes grinding pin and hose unit.ModelSRD 3 - 55/2 KECapacity at 6 bar W 60Speed at no load rpm 55000Hose length M 1,5Clear hose width mm 4,5Air consumption l/min 170Sound level db (A) 74Weight Kg 0,09578256 Chamfering pencil Ident. No. 010Unit price E O.R.h Accessories: Carbide grinding pin toothing 63, head Ø 3 mm, head length 13 mm, total length Prod. Gr. 74843 mm, shank Ø 3 mm see No. 76008 026 page 1289.Carbide burrContinued next pageCompressed air drill deburring machineExecution: environmentally friendly due to central air extractor, air discharge at the back. Self-starting bypressing on the machine, thereby secure joining of countersink, chatter-free, flaking cut, precise centring.Rational working with heavy and bulky work pieces.Normal accessories: collet chuck 8 mm, spanner for tool change, outside thread nozzle, pressure hose1.5 m long. Maintenance unit see No. 75424, page 1278.For installation in stationary machines, the types BE 805 R (with push start) and BE 805 R-2(starting with extreme valve) are available.Model BE 805rpm rpm 500Countersinking up to bore Ø mm 24Max. tool Ø with supplied collet mm 8Ø x length mm 32 x 230Connecting thread G 1 / 8Clear hose width mm 7Air consumption l/min 280Weight Kg 0,5278300 Deburring machine Ident. No. 020Unit price E O.R.Straight shank for Ø mm 3,5-15 5-25Shaft Ø mm 8 878300 Countersink bits 90° HSS with 3 cutters Ident. No. 120 130Unit price E O.R. O.R.Prod. Gr. 748Electric toolsContinued next pageManual grinding spindle TopSpin ®Application: for deburring, grinding, polishing and similar works. Areas of application in industry, in tooland mould construction, in modelling and ornament production.Execution: the device is a perfect combination of function and design. The displays on the graphic LCD areclear and easily understandable. The motor is started in direct vicinity of the work place by pressing theON/OFF switch on the hand piece. The smooth and low-vibration run and the ergonomic design of the handpiece facilitate a precise working on demanding pieces. If required, the device can be equipped with asecond hand piece. For both hand pieces, three values each for speed and direction of rotation can besaves. As an option, the speed is infinitely variable via a pedal controller.Control device: speed regulation, infinitely variable 1/min. 3000-50000Mains connection (AC)/preliminary fuse V/AT 230/2,5Power consumption VA 200Weight, control device Kg 6,1Hand piece:Collet Ø mm 3Max. Operating voltage (DC) V 36Continuous operation W 60Weight, hand piece g 30078350 Ident. No. 010Unit price E (O.R.)h We are prepared to present you the manual grinding spindle in your company.Prod. Gr. 786Advice and information on request.t Technical Hotline +49(0)711 9813-360186Ø 33184207Hand piece200 240Control unitØ 13,51354 2010/11