2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1Total7 minutesINSTRUCTIONS TO EXAMINEEThe evaluator will read the following instructions aloud to the examinee:"Let me have your attention. This task evaluates your ability to install the M240Ccoaxial machine gun."Do you understand these instructions?"Pause for 5 seconds, then say—"You have 2 minutes to complete the task."Pause again, then say--"Begin."Start timing at once. If the examinee has not completed the task after 2 minutes, then sayloudly enough for him to hear--"Stop."If at any time you think that he is going to damage the equipment or injure himself,then say--"Stop."PERFORMANCE MEASURES1. Completed performance measures within 2 minutes.2. Elevated gun to 300 mils.3. Opened coax machine gun access doors.a. Unlatched CTD from its bracket.b. Released handle on right access door to unlatched door.c. Pulled out on left side of CTD to open left access door.d. Pushed in right coax machine gun access door.4. Mounted coax machine gun.a. Placed coax machine gun on gun mount.b. Ensured gun barrel points forward and trigger points down.c. Aligned mounting holes on gun with retaining pins on gun mount.d. Pushed retaining pins fully into gun.e. Flipped in handles on retaining pins to lock.f. Checked that coax barrel locking latched was locked.g. Checked that coax barrel did not turn.5. Closed coax machine gun access doors.a. Pulled in right coax machine gun access door.b. Pushed in on left side of CTD to close left access door.c. Latched handle on right coax access door.d. Latched CTD on bracket.A-17