2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1(1) Use a ruler that has markings every 1/16 of an inch. A 1/16-scale allowsmeasurement to the nearest 1/8 mil of the scoresheet.(2) Measure the distance between the two aiming points marked on scoring grid 1.The distance in this example is 7/16 inch.(3) Record the measured distance in the DISTANCE BETWEEN AIM POINTSblock of data section 1.(4) Score TEST 1.• Circle GO in data section 1 if distance is 1/2 inch or less.• Circle NO GO in data section 1 if distance is more than 1/2 inch.(5) Record distance in mils between aim points (Figure B-35). See the conversionchart in Table B-1.Figure B-35. Distance between aim points, TEST 1.INCHES 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1MILS 1/4 1/2 3/4 1 1 1/4 1 1/2 1 3/4 2Table B-1. Inch-to-mil conversion chart.(6) Measure the distance between aiming points marked on scoring grid 2. Thedistance in this example is 5/8 inch. Record this distance in the DISTANCE BETWEENAIM POINTS block in data section 1.(7) Score TEST 2 (Figure B-36, page B-24).• Circle GO in data section 1 if distance is 1/2 inch or less.• Circle NO GO in data section 1 if distance is more than 1/2 inch.B-23