2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1the crew engages targets typically found in UO operations. Crews engage stationary andmoving LTID-equipped panel targets (when available) from a moving and stationaryMILES or PGS-equipped BFV. Frontal stationary targets may be used if moving targetsare not available or the UO site is not equipped with moving targets. The BCUC consistsof 5-day engagements and 5-night engagements (see table below). Scaled targets may beused however full-scale targets are recommended. OPFOR may be used when UOfacilities are not equipped with full-scale targets. Figure E-9, page E-12, shows day andnight engagements for BT IIA.a. Task. Engage and destroy stationary and moving targets from a stationary andmoving BFV during the day and night.b. Conditions. Given a MILES or PGS equipped BFV, suitable UO environmentwith LTID equipped targets, during the day and night.c. Standards. The crew must achieve a minimum of a “P” rating on 7 of the 10engagements, with 2 of the 7 being night engagements. They must not engage anyfriendly or noncombatant targets.d. TDRS Cards. If OPFOR is used with BFVs that have PGS, then TDRS cardsmust be programmed for "Force on Force."E-11