2003 US Army BRADLEY GUNNERY 503p.pdf - Survival Books

FM 3-22.1TASK 7CLEAR AN M240C COAX MACHINE GUN AND UNLOAD 7.62-MMAMMUNITION(M2, M3, M2A2, M3A2, OR M2A2 ODS, OR M3A2 ODS)CONDITIONSGiven a Bradley with BII and coax machine gun loaded with 300 rounds of 7.62-mmdummy ammunition.STANDARDSWithin 4 minutes, the crewmember--1. Cleared the M240C.2. Unloaded the ammunition from the forwarder and stowed it in the ammunition can.EVALUATION PROCEDURES1. Administrative Process. At this task, the evaluator logs information about eachcrewmember on a roster. He supplies the crewmember with all required materials andequipment, displaying them IAW this manual. He uses the performance measures torecord the crewmember's performance. Afterward, he tells the crewmember how wellthe crewmember performed on this task and directs him to the next task or to furthertraining. One evaluator can test one--and only one--crewmember at a time.2. Procedures Used When Personnel Receive a NO GO. If a crewmember fails toachieve the standards on the performance measures, he earns a NO GO. When thishappens, the evaluator explains to the crewmember what he did wrong and how tocorrect his mistakes. Then, he retests the crewmember IAW local SOP.PERSONNEL, EQUIPMENT, AND MATERIALS• Qualified 11B, 12B, 13F, 14R, or 19D, sergeant or above.• Operational M2, M2A2, M2A2 ODS or M3, M3A2, M3A2 ODS with BII.• TM 9-1005-313-10.• TM 9-2350-284-10-2 or TM 9-2350-252-10-2.• FM 3-22.1.• Operational M240C coax (installed).• 300 rounds of 7.62-mm dummy ammunition.• Stopwatch.• Clipboard with pen.• One helper, qualified 11B, 12B, 13F, 14R, or 19D, sergeant or below.PRETEST PREPARATION1. Clear the weapon.2. Disassemble and reassemble the weapon to ensure that all parts are present andoperational.3. Install the M240C.4. Load the M240C coax with dummy 7.62-mm ammunition.PRETEST CONDITIONS FOR EACH EXAMINEE1. Turn on master power.A-24